Data Domain: Jak wyświetlić listę migawek
Summary: W tym artykule pokazano, jak wyświetlić listę migawek w systemie Data Domain.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
W przypadku systemów Data Domain z systemem DD OS w wersji 5.0.x.x lub nowszej:
- Zidentyfikuj, które drzewo MTree ma zostać zbadane za pomocą
mtree list. (Uwaga: backup jest domyślnym MTree dla wersji 5.0.)# mtree list Name Pre-Comp (GiB) Status ----------------- -------------- ------ /data/col1/backup 95.0 RW /data/col1/testmtree 2.0 RW ----------------- -------------- ------ D : Deleted RO : Read Only RW : Read Write RD : Replication Destination RLE : Retention-Lock Enabled RLD : Retention-Lock Disabled
- Wyświetlanie listy migawek w określonym obiekcie MTree przy użyciu atrybutu
snapshot list mtree <mtree name>:# snapshot list mtree /data/col1/testmtree Snapshot Information for MTree: /data/col1/testmtree ---------------------------------------------- Name Pre-Comp (GiB) Create Date Retain Until Status ----- -------------- ----------------- ------------ ------ btest 1.0 Apr 25 2011 15:26 ----- -------------- ----------------- ------------ ------ Snapshot Summary ------------------- Total: 1 Not expired: 1 Expired: 0
- Wyświetlanie listy wszystkich migawek dla wszystkich drzew MTree
# snapshot list mtree *
Additional Information
Aby uzyskać informacje na temat tworzenia migawek, zobacz Data Domain — tworzenie migawki.
Affected Products
Data DomainProducts
Data DomainArticle Properties
Article Number: 000012149
Article Type: How To
Last Modified: 01 Jul 2024
Version: 5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.