Dell Unity: Advarsel Kode: flr::check_if_storage_pool_recovery_is_required_3

Summary: Annen grunn til at det vises en advarsel når du kjører tilstandskontroller før oppgradering.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

Det vises en advarsel i skjermbildene når du prøver å kjøre tilstandskontrollene før oppgraderingen.

Innsamlede data samles inn (se KB-483583 om hvordan du samler inn tjenestedata fra en Dell Unity:-array) og kjører sortering på dem

TRiiAGE_SPlogs.txt fil:

B       08/29/16 08:14:03.616 UpdateProvider     180001 [INFO] User: Health check has been started.
B       08/29/16 08:14:32.315 PreUpdateHealhthChk        0 [INFO] System: Msg: Key=[flr::check_if_storage_pool_recovery_is_required_3] Level=[external] Title=[Flare: Check if storage pool recovery is required ] Full Error Log=[/nas/log/check_health.160829-081403.log]

/nas/log/check_health.160829-081403.log

2016-08-29T08:14:31+00:00 check_if_storage_pool_recovery_is_required: (Pass Pass Pass Fail)
..
..
..
One or more warnings have occurred. It is recommended that you follow the
instructions provided to correct the problem then try again.

Upgrade cannot proceed.

------------------------------------Warnings------------------------------------
Flare: Check if storage pool recovery is required
The following pools do not appear to be in a healthy state:

     * P4, Database Prod Pool - This storage pool has exceeded the capacity
       threshold you specified. To allocate more storage space, add
       additional disks to your system. (https://W.X.Y.Z/help/webhelp/-
       en_US/index.htm?#unity_c_storage_pool_at_or_near_full_capacity.html)
Action : Upgrade may continue, but the recommended course of action is
     to escalate this issue through your support organization. Provide this
     output with the escalation.

ERROR_CODE=flr::check_if_storage_pool_recovery_is_required_3|Warning|P4, Database Prod Pool - This storage pool has exceeded the capacity threshold you specified. To allocate more storage space, add additional disks to your system. (https://W.X.Y.Z/help/webhelp/en_US/index.htm?#unity_c_storage_pool_at_or_near_full_capacity.html)
--------------------------------------------------------------------------------

Check Result: Warning

 

Cause

Etter å ha gått gjennom TRiiAGE_SPlogs.txt og /nas/log/check_health.160829-081403.log, ser man at basseng P4 har overskredet kapasitetsterskelen.

 

Resolution

Slik utbedrer du situasjonen:

  1. Under Lagring velger du Utvalg.
  2. Velg det aktuelle utvalget, og velg deretter Rediger-ikonet.
  3. I kategorien Bruk øker du varselterskelen til en prosentandel over det brukte beløpet.
  4. Kjør tilstandskontroller før oppgradering på nytt
Merk: Varslingsterskelen er prosentandelen av lagringstildeling der Unisphere genererer varsler om hvor mye plass som er igjen i bassenget. Du kan angi denne verdien mellom 50 % og 84 %.

 

Additional Information

Disse loggene posteres i TRiiAGE_SPlogs.txt etter endring av varslingsterskelen for P4-lagringsgruppen. Ingen feil blir sett etter den andre helsesjekken som er en indikasjon på et rent løp uten feil eller advarsler.

B       08/29/16 09:00:19.684 mlu               12d010c [INFO] System: The user has initiated the change of one or more properties for Storage Pool 300000005.
B       08/29/16 09:00:19.697 mlu               12d010d [INFO] System: The user has successfully changed one or more properties for Storage Pool 300000005.
B       08/29/16 09:00:21.756 UIS_PoolProvisioningService   540066 [INFO] Audit: User local/admin has successfully modified pool P4, Database Prod Pool.
B       08/29/16 09:00:22.024 Health              60326 [INFO] User: Storage pool P4, Database Prod Pool is operating normally
B       08/29/16 09:01:28.552 UpdateProvider     180001 [INFO] User: Health check has been started.

 

Affected Products

Dell EMC Unity Family

Products

Dell Unity 300, Dell EMC Unity 300F, Dell EMC Unity 400, Dell EMC Unity 400F, Dell EMC Unity 500, Dell EMC Unity 500F, Dell EMC Unity 600, Dell EMC Unity 600F, Dell EMC Unity Family |Dell EMC Unity All Flash, Dell EMC Unity Family , Dell EMC Unity Hybrid, Dell EMC UnityVSA Professional Edition/Unity Cloud Edition ...
Article Properties
Article Number: 000052020
Article Type: Solution
Last Modified: 24 Oct 2025
Version:  5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.