Dell EMC Unity: So beheben Sie das Problem "Löschstatus: nicht unterstützt" für von VPlex bereitgestelltes Unity-Volume (vom Nutzer korrigierbar)
Summary: Dell EMC Unity: So beheben Sie das Problem "Löschstatus: nicht unterstützt" für von VPlex bereitgestelltes Unity-Volume (vom Nutzer korrigierbar)
Symptoms
Dies betrifft das Problem mit dem VAAI UNMAP-Plug-in. Der Löschstatus wird als nicht unterstützt angezeigt:
[root@ESXi:/] esxcli storage core device vaai status get -d naa.<WWN> VAAI Plugin Name: VMW_VAAIP_CX ATS Status: supported Clone Status: supported Zero Status: supported Delete Status: unsupported <<<<<<<<< The UNMAP feature became available for Unity arrays from VPLEX 6.0 Service Pack 1. So, must confirm if the VPlex is running on the correct version code that supports UNMAP. But, when the VPlex is running on the version that supports the UNMAP feature for Unity, the UNMAP feature reports unsupported. The use of UNMAP is limited to Thin provisioned volumes. So, need to check if the the LUNs are thin provisioned or not:
[root@ESXi:~] esxcli storage core device list -d naa.<WWN> <Output is truncated> . . Thin Provisioning Status: unknown <<<<<<< It means that the LUNs are thick provisioned
Cause
ODER
wenn VPlex auf der Version ausgeführt wird, die die UNMAP-Funktion für Unity unterstützt, liegt die Ursache darin, dass die LUNs mit Thick Provisioning oder die LUNs auf Unity mit Thin Provisioning bereitgestellt werden, aber die Funktion "Thin-enabled" auf dem virtuellen VPlex-Volume deaktiviert ist.
Resolution
Wenn VPlex nicht auf der Version ausgeführt wird, die die UNMAP-Funktion für Unity unterstützt. Der Kunde führt ein Upgrade von VPlex auf 6.0 SP 1 durch, der Thin-UNMAP unterstützt.
Andernfalls
wird auf VPlex :
1 geprüft. Überprüfen Sie, ob das für VPlex bereitgestellte Speicher-Volume Thin-fähig ist:
VPlexcli:/clusters/cluster-1/storage-elements/storage-volumes> ll Name VPD83 ID Capacity Use Vendor IO Status Type Thin Provision Thin --------------------------------- ------------------------ -------- --------- ------- ----------- ----------- Rebuild Type Capable --------------------------------- ------------------------ -------- --------- ------- ----------- ----------- ------- --------- ------- VPD83T3:514f0c5b94e0002c VPD83T3:514f0c5b94e0002c 15G used Unity alive normal false legacy true
2. Überprüfen Sie, ob die Thin-aktivierte Funktion auf dem virtuellen VPlex-Volume aktiviert ist:VPlexcli:/clusters/cluster-1/virtual-volumes/testvolume_vol> ll
Name Value
-------------------------- ----------------------------------------
block-count 3932160
block-size 4K
cache-mode synchronous
capacity 15G
consistency-group -
expandable true
expandable-capacity 0B
expansion-method storage-volume
expansion-status -
health-indications []
health-state ok
locality local
operational-status ok
recoverpoint-protection-at []
recoverpoint-usage -
scsi-release-delay 0
service-status running
storage-tier -
supporting-device testvolume
system-id testvolume_vol
thin-capable true
thin-enabled disabled <--- thin enabled is not set!!
volume-type virtual-volume
vpd-id VPD83T3:6000144000000010b021768279d4285d
3. Aktivieren Sie die Thin-Funktion auf dem virtuellen Volume, wenn sie deaktiviert ist:VPlexcli:/clusters/cluster-1/virtual-volumes/testvolume_vol>set thin-enabled 1
Prüft ESXi:
4. Scannen Sie den Speicher auf dem ESXi-Server. Dies kann sowohl über die Kommandozeile als auch über VCenter erfolgen.[root@ESXi:/] esxcli storage core adapter rescan --all
5. Anmelden Führen Sie den Befehl storage core path für das virtuelle VPlex-Volume aus. Naa-ID i :[root@ESXi:/] esxcli storage core path list
fc.20000024ff548aa8:21000024ff548aa8-fc.5000144047b02176:50001442d0217600-naa.6000144000000010b021768279d4285d
UID: fc.20000024ff548aa8:21000024ff548aa8-fc.5000144047b02176:50001442d0217600-naa.6000144000000010b021768279d4285d
Runtime Name: vmhba2:C0:T3:L0
Device: naa.6000144000000010b021768279d4285d
Device Display Name: EMC Fibre Channel Disk (naa.6000144000000010b021768279d4285d)
Adapter: vmhba2
Channel: 0
Target: 3
LUN: 0
Plugin: NMP
State: active
Transport: fc
Adapter Identifier: fc.20000024ff548aa8:21000024ff548aa8
Target Identifier: fc.5000144047b02176:50001442d0217600
Adapter Transport Details: WWNN: 20:00:00:24:ff:54:8a:a8 WWPN: 21:00:00:24:ff:54:8a:a8
Target Transport Details: WWNN: 50:00:14:40:47:b0:21:76 WWPN: 50:00:14:42:d0:21:76:00
Maximum IO Size: 33553920Get Vplex virtual volume NAA
6. Vor dem Erstellen einer Partition oder eines Datenspeichers auf dem Volume kann ESXi den Thin Provisioning-Status für dieses Volume nicht abrufen, daher wird weiterhin gemeldet, dass die Funktion nicht unterstützt wird:
[root@ESXi:/] esxcli storage core device vaai status get -d naa.6000144000000010b021768279d4285d
naa.6000144000000010b021768279d4285d
VAAI Plugin Name:
ATS Status: supported
Clone Status: supported
Zero Status: supported
Delete Status: unsupported[root@ESXi:/] esxcli storage core device list -d naa.6000144000000010b021768279d4285d
naa.6000144000000010b021768279d4285d
Display Name: EMC Fibre Channel Disk (naa.6000144000000010b021768279d4285d)
Has Settable Display Name: true
Size: 15360
Device Type: Direct-Access
Multipath Plugin: NMP
Devfs Path: /vmfs/devices/disks/naa.6000144000000010b021768279d4285d
Vendor: EMC
Model: Invista
Revision: 5520
SCSI Level: 4
Is Pseudo: false
Status: on
Is RDM Capable: true
Is Local: false
Is Removable: false
Is SSD: false
Is VVOL PE: false
Is Offline: false
Is Perennially Reserved: false
Queue Full Sample Size: 0
Queue Full Threshold: 0
Thin Provisioning Status: unknown
Attached Filters:
VAAI Status: supported
Other UIDs: vml.02000000006000144000000010b021768279d4285d496e76697374
Is Shared Clusterwide: true
Is Local SAS Device: false
Is SAS: false
Is USB: false
Is Boot USB Device: false
Is Boot Device: false
Device Max Queue Depth: 64
No of outstanding IOs with competing worlds: 32
Drive Type: unknown
RAID Level: unknown
Number of Physical Drives: unknown
Protection Enabled: false
PI Activated: false
PI Type: 0
PI Protection Mask: NO PROTECTION
Supported Guard Types: NO GUARD SUPPORT
DIX Enabled: false
DIX Guard Type: NO GUARD SUPPORT
Emulated DIX/DIF Enabled: false
7. Erstellen Sie einen Datenspeicher auf dem Volume oder erstellen Sie manuell eine Partitionstabelle für das Volume. Der Thin Provision-Status ändert sich in "Ja" und "Unmap" ändert sich in "unterstützt".[root@ESXi:/] esxcli storage core device list -d naa.6000144000000010b021768279d4285d
Is VVOL PE: false
Is Offline: false
Is Perennially Reserved: false
Queue Full Sample Size: 0
Queue Full Threshold: 0
Thin Provisioning Status: yes[root@ESXi:/] esxcli storage core device vaai status get -d naa.6000144000000010b021768279d4285d
naa.6000144000000010b021768279d4285d
VAAI Plugin Name:
ATS Status: supported
Clone Status: supported
Zero Status: supported
Delete Status: supported
8. Anmelden Wenn ESXi nach dem Ausführen der obigen Schritte den Unmap-Status immer noch nicht aktualisieren kann, suchen Sie nach dem VMware-KBA und untersuchen Sie ihn von ESXi-Seite.
Additional Information
https://support.emc.com/docu81003_VPLEX-GeoSynchrony-6.0-Service-Pack-1-and-Patches--Release-Notes.pdf?language=en_US