Dell EMC Unity: Cómo abordar el problema "Estado de eliminación: no compatible" para el volumen Unity aprovisionado de VPLEX (corregible por el usuario)
Summary: Dell EMC Unity: Cómo abordar el problema "Estado de eliminación: no compatible" para el volumen Unity aprovisionado de VPLEX (corregible por el usuario)
Symptoms
Esto se relaciona con el problema del plug-in VAAI UNMAP, el estado de eliminación se muestra como no compatible:
[root@ESXi:/] esxcli storage core device vaai status get -d naa.<WWN> VAAI Plugin Name: VMW_VAAIP_CX ATS Status: supported Clone Status: supported Zero Status: supported Delete Status: unsupported <<<<<<<<< The UNMAP feature became available for Unity arrays from VPLEX 6.0 Service Pack 1. So, must confirm if the VPlex is running on the correct version code that supports UNMAP. But, when the VPlex is running on the version that supports the UNMAP feature for Unity, the UNMAP feature reports unsupported. The use of UNMAP is limited to Thin provisioned volumes. So, need to check if the the LUNs are thin provisioned or not:
[root@ESXi:~] esxcli storage core device list -d naa.<WWN> <Output is truncated> . . Thin Provisioning Status: unknown <<<<<<< It means that the LUNs are thick provisioned
Cause
O
bien, si VPlex se ejecuta en la versión compatible con la función UNMAP para Unity, la causa es que los LUN son de aprovisionamiento grueso o los LUN son de aprovisionamiento delgado en Unity, pero la función de aprovisionamiento delgado en el volumen virtual de VPLEX está deshabilitada.
Resolution
Si el VPlex no se está ejecutando en la versión compatible con la característica UNMAP para Unity. El cliente debe actualizar VPlex a 6.0 SP 1, que es compatible con UNMAP delgado.
De lo contrario,
comprueba en VPLEX
:1. Verifique si el volumen de almacenamiento aprovisionado a VPLEX es compatible con funcionalidades delgadas:
VPlexcli:/clusters/cluster-1/storage-elements/storage-volumes> ll Name VPD83 ID Capacity Use Vendor IO Status Type Thin Provision Thin --------------------------------- ------------------------ -------- --------- ------- ----------- ----------- Rebuild Type Capable --------------------------------- ------------------------ -------- --------- ------- ----------- ----------- ------- --------- ------- VPD83T3:514f0c5b94e0002c VPD83T3:514f0c5b94e0002c 15G used Unity alive normal false legacy true
2. Verifique si la función de aprovisionamiento delgado habilitado en el volumen virtual de VPLEX está habilitada:VPlexcli:/clusters/cluster-1/virtual-volumes/testvolume_vol> ll
Name Value
-------------------------- ----------------------------------------
block-count 3932160
block-size 4K
cache-mode synchronous
capacity 15G
consistency-group -
expandable true
expandable-capacity 0B
expansion-method storage-volume
expansion-status -
health-indications []
health-state ok
locality local
operational-status ok
recoverpoint-protection-at []
recoverpoint-usage -
scsi-release-delay 0
service-status running
storage-tier -
supporting-device testvolume
system-id testvolume_vol
thin-capable true
thin-enabled disabled <--- thin enabled is not set!!
volume-type virtual-volume
vpd-id VPD83T3:6000144000000010b021768279d4285d
3. Habilite la función de aprovisionamiento delgado en el volumen virtual, si está deshabilitada:VPlexcli:/clusters/cluster-1/virtual-volumes/testvolume_vol>set thin-enabled 1
Comprobaciones en ESXi:
4. Escanee el almacenamiento en el servidor ESXi. Se puede realizar a través de la línea de comandos y VCenter.[root@ESXi:/] esxcli storage core adapter rescan --all
5. Ejecute el comando storage core path en el Naa id i del volumen virtual de VPLEX:[root@ESXi:/] esxcli storage core path list
fc.20000024ff548aa8:21000024ff548aa8-fc.5000144047b02176:50001442d0217600-naa.6000144000000010b021768279d4285d
UID: fc.20000024ff548aa8:21000024ff548aa8-fc.5000144047b02176:50001442d0217600-naa.6000144000000010b021768279d4285d
Runtime Name: vmhba2:C0:T3:L0
Device: naa.6000144000000010b021768279d4285d
Device Display Name: EMC Fibre Channel Disk (naa.6000144000000010b021768279d4285d)
Adapter: vmhba2
Channel: 0
Target: 3
LUN: 0
Plugin: NMP
State: active
Transport: fc
Adapter Identifier: fc.20000024ff548aa8:21000024ff548aa8
Target Identifier: fc.5000144047b02176:50001442d0217600
Adapter Transport Details: WWNN: 20:00:00:24:ff:54:8a:a8 WWPN: 21:00:00:24:ff:54:8a:a8
Target Transport Details: WWNN: 50:00:14:40:47:b0:21:76 WWPN: 50:00:14:42:d0:21:76:00
Maximum IO Size: 33553920Get Vplex virtual volume NAA
6. Antes de crear una partición o un almacén de datos en el volumen, ESXi no puede obtener el estado de aprovisionamiento delgado para ese volumen, por lo que aún informa que la característica no es compatible:
[root@ESXi:/] esxcli storage core device vaai status get -d naa.6000144000000010b021768279d4285d
naa.6000144000000010b021768279d4285d
VAAI Plugin Name:
ATS Status: supported
Clone Status: supported
Zero Status: supported
Delete Status: unsupported[root@ESXi:/] esxcli storage core device list -d naa.6000144000000010b021768279d4285d
naa.6000144000000010b021768279d4285d
Display Name: EMC Fibre Channel Disk (naa.6000144000000010b021768279d4285d)
Has Settable Display Name: true
Size: 15360
Device Type: Direct-Access
Multipath Plugin: NMP
Devfs Path: /vmfs/devices/disks/naa.6000144000000010b021768279d4285d
Vendor: EMC
Model: Invista
Revision: 5520
SCSI Level: 4
Is Pseudo: false
Status: on
Is RDM Capable: true
Is Local: false
Is Removable: false
Is SSD: false
Is VVOL PE: false
Is Offline: false
Is Perennially Reserved: false
Queue Full Sample Size: 0
Queue Full Threshold: 0
Thin Provisioning Status: unknown
Attached Filters:
VAAI Status: supported
Other UIDs: vml.02000000006000144000000010b021768279d4285d496e76697374
Is Shared Clusterwide: true
Is Local SAS Device: false
Is SAS: false
Is USB: false
Is Boot USB Device: false
Is Boot Device: false
Device Max Queue Depth: 64
No of outstanding IOs with competing worlds: 32
Drive Type: unknown
RAID Level: unknown
Number of Physical Drives: unknown
Protection Enabled: false
PI Activated: false
PI Type: 0
PI Protection Mask: NO PROTECTION
Supported Guard Types: NO GUARD SUPPORT
DIX Enabled: false
DIX Guard Type: NO GUARD SUPPORT
Emulated DIX/DIF Enabled: false
7. Cree un almacén de datos en el volumen o cree manualmente una tabla de partición para el volumen, el estado de aprovisionamiento delgado cambiará a yes y la desasignación "cambiará a compatible".[root@ESXi:/] esxcli storage core device list -d naa.6000144000000010b021768279d4285d
Is VVOL PE: false
Is Offline: false
Is Perennially Reserved: false
Queue Full Sample Size: 0
Queue Full Threshold: 0
Thin Provisioning Status: yes[root@ESXi:/] esxcli storage core device vaai status get -d naa.6000144000000010b021768279d4285d
naa.6000144000000010b021768279d4285d
VAAI Plugin Name:
ATS Status: supported
Clone Status: supported
Zero Status: supported
Delete Status: supported
8. Después de ejecutar los pasos anteriores, si ESXi aún no puede actualizar el estado de desasignación, busque el KBA de VMware e investigue desde el lado de ESXi.
Additional Information
https://support.emc.com/docu81003_VPLEX-GeoSynchrony-6.0-Service-Pack-1-and-Patches--Release-Notes.pdf?language=en_US