Dell EMC Unity: Het probleem "Status verwijderen: niet ondersteund" oplossen voor een door VPlex ingericht Unity-volume (op te lossen door gebruiker)
Summary: Dell EMC Unity: Het probleem "Status verwijderen: niet ondersteund" oplossen voor een door VPlex ingericht Unity-volume (op te lossen door gebruiker)
Symptoms
Dit betreft het probleem met de VAAI UNMAP-plug-in, de verwijderstatus wordt niet ondersteund:
[root@ESXi:/] esxcli storage core device vaai status get -d naa.<WWN> VAAI Plugin Name: VMW_VAAIP_CX ATS Status: supported Clone Status: supported Zero Status: supported Delete Status: unsupported <<<<<<<<< The UNMAP feature became available for Unity arrays from VPLEX 6.0 Service Pack 1. So, must confirm if the VPlex is running on the correct version code that supports UNMAP. But, when the VPlex is running on the version that supports the UNMAP feature for Unity, the UNMAP feature reports unsupported. The use of UNMAP is limited to Thin provisioned volumes. So, need to check if the the LUNs are thin provisioned or not:
[root@ESXi:~] esxcli storage core device list -d naa.<WWN> <Output is truncated> . . Thin Provisioning Status: unknown <<<<<<< It means that the LUNs are thick provisioned
Cause
OF
als de VPlex wordt uitgevoerd op de versie die de UNMAP-functie voor Unity ondersteunt, is de oorzaak dat de LUN's thick provisioned zijn of de LUN's thin provisioned zijn op Unity, maar thin enabled-feature op VPlex virtueel volume is uitgeschakeld.
Resolution
Als de VPlex niet wordt uitgevoerd op de versie die de UNMAP-functie voor Unity ondersteunt. Klant voert een upgrade uit van VPlex naar 6.0 SP 1, die thin UNMAP ondersteunt.
Anders
controleert u VPlex :
1. Controleer of het storagevolume dat is ingericht in VPlex thin capabel is:
VPlexcli:/clusters/cluster-1/storage-elements/storage-volumes> ll Name VPD83 ID Capacity Use Vendor IO Status Type Thin Provision Thin --------------------------------- ------------------------ -------- --------- ------- ----------- ----------- Rebuild Type Capable --------------------------------- ------------------------ -------- --------- ------- ----------- ----------- ------- --------- ------- VPD83T3:514f0c5b94e0002c VPD83T3:514f0c5b94e0002c 15G used Unity alive normal false legacy true
2. Controleer of de functie thin ingeschakeld op virtueel VPlex-volume is ingeschakeld:VPlexcli:/clusters/cluster-1/virtual-volumes/testvolume_vol> ll
Name Value
-------------------------- ----------------------------------------
block-count 3932160
block-size 4K
cache-mode synchronous
capacity 15G
consistency-group -
expandable true
expandable-capacity 0B
expansion-method storage-volume
expansion-status -
health-indications []
health-state ok
locality local
operational-status ok
recoverpoint-protection-at []
recoverpoint-usage -
scsi-release-delay 0
service-status running
storage-tier -
supporting-device testvolume
system-id testvolume_vol
thin-capable true
thin-enabled disabled <--- thin enabled is not set!!
volume-type virtual-volume
vpd-id VPD83T3:6000144000000010b021768279d4285d
3. okt. Schakel de dunne functie in op het virtuele volume als deze is uitgeschakeld:VPlexcli:/clusters/cluster-1/virtual-volumes/testvolume_vol>set thin-enabled 1
Controles op ESXi :
4. okt. Scan storage op ESXi-server. Het kan zowel via de opdrachtregel als via VCenter.[root@ESXi:/] esxcli storage core adapter rescan --all
5. okt. Voer de opdracht storage core path uit op het VPlex virtual-volume Naa id i:[root@ESXi:/] esxcli storage core path list
fc.20000024ff548aa8:21000024ff548aa8-fc.5000144047b02176:50001442d0217600-naa.6000144000000010b021768279d4285d
UID: fc.20000024ff548aa8:21000024ff548aa8-fc.5000144047b02176:50001442d0217600-naa.6000144000000010b021768279d4285d
Runtime Name: vmhba2:C0:T3:L0
Device: naa.6000144000000010b021768279d4285d
Device Display Name: EMC Fibre Channel Disk (naa.6000144000000010b021768279d4285d)
Adapter: vmhba2
Channel: 0
Target: 3
LUN: 0
Plugin: NMP
State: active
Transport: fc
Adapter Identifier: fc.20000024ff548aa8:21000024ff548aa8
Target Identifier: fc.5000144047b02176:50001442d0217600
Adapter Transport Details: WWNN: 20:00:00:24:ff:54:8a:a8 WWPN: 21:00:00:24:ff:54:8a:a8
Target Transport Details: WWNN: 50:00:14:40:47:b0:21:76 WWPN: 50:00:14:42:d0:21:76:00
Maximum IO Size: 33553920Get Vplex virtual volume NAA
6. okt. Voordat er een partitie of datastore op het volume wordt gemaakt, kan ESXi de status Thin Provisioning voor dat volume niet krijgen, waardoor de functie nog steeds wordt ondersteund:
[root@ESXi:/] esxcli storage core device vaai status get -d naa.6000144000000010b021768279d4285d
naa.6000144000000010b021768279d4285d
VAAI Plugin Name:
ATS Status: supported
Clone Status: supported
Zero Status: supported
Delete Status: unsupported[root@ESXi:/] esxcli storage core device list -d naa.6000144000000010b021768279d4285d
naa.6000144000000010b021768279d4285d
Display Name: EMC Fibre Channel Disk (naa.6000144000000010b021768279d4285d)
Has Settable Display Name: true
Size: 15360
Device Type: Direct-Access
Multipath Plugin: NMP
Devfs Path: /vmfs/devices/disks/naa.6000144000000010b021768279d4285d
Vendor: EMC
Model: Invista
Revision: 5520
SCSI Level: 4
Is Pseudo: false
Status: on
Is RDM Capable: true
Is Local: false
Is Removable: false
Is SSD: false
Is VVOL PE: false
Is Offline: false
Is Perennially Reserved: false
Queue Full Sample Size: 0
Queue Full Threshold: 0
Thin Provisioning Status: unknown
Attached Filters:
VAAI Status: supported
Other UIDs: vml.02000000006000144000000010b021768279d4285d496e76697374
Is Shared Clusterwide: true
Is Local SAS Device: false
Is SAS: false
Is USB: false
Is Boot USB Device: false
Is Boot Device: false
Device Max Queue Depth: 64
No of outstanding IOs with competing worlds: 32
Drive Type: unknown
RAID Level: unknown
Number of Physical Drives: unknown
Protection Enabled: false
PI Activated: false
PI Type: 0
PI Protection Mask: NO PROTECTION
Supported Guard Types: NO GUARD SUPPORT
DIX Enabled: false
DIX Guard Type: NO GUARD SUPPORT
Emulated DIX/DIF Enabled: false
7. okt. Maak datastore op het volume of maak handmatig een partitietabel voor het volume. De thin provisioning-status wordt gewijzigd in Ja en Unmap wordt gewijzigd in Ondersteund.[root@ESXi:/] esxcli storage core device list -d naa.6000144000000010b021768279d4285d
Is VVOL PE: false
Is Offline: false
Is Perennially Reserved: false
Queue Full Sample Size: 0
Queue Full Threshold: 0
Thin Provisioning Status: yes[root@ESXi:/] esxcli storage core device vaai status get -d naa.6000144000000010b021768279d4285d
naa.6000144000000010b021768279d4285d
VAAI Plugin Name:
ATS Status: supported
Clone Status: supported
Zero Status: supported
Delete Status: supported
8. okt. Als de ESXi na het uitvoeren van de bovenstaande stappen nog steeds niet in staat is om de unmap-status bij te werken, controleert u op de VMware KBA en onderzoekt u vanaf de ESXi-kant.
Additional Information
https://support.emc.com/docu81003_VPLEX-GeoSynchrony-6.0-Service-Pack-1-and-Patches--Release-Notes.pdf?language=en_US