Dell EMC Unity: Slik løser du problemet med Slett status: støttes ikke for VPlex klargjort Unity-volum (kan korrigeres av brukeren)

Summary: Dell EMC Unity: Slik løser du problemet med Slett status: støttes ikke for VPlex klargjort Unity-volum (kan korrigeres av brukeren)

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms


Dette gjelder VAAI UNMAP plug-in problemet, slette status vises ikke støttes:

[root@ESXi:/] esxcli storage core device vaai status get -d naa.<WWN>
   VAAI Plugin Name: VMW_VAAIP_CX
   ATS Status: supported
   Clone Status: supported
   Zero Status: supported
   Delete Status: unsupported <<<<<<<<<


The UNMAP feature became available for Unity arrays from VPLEX 6.0 Service Pack 1. So, must confirm if the VPlex is running on the correct version code that supports UNMAP.

But, when the VPlex is running on the version that supports the UNMAP feature for Unity, the UNMAP feature reports unsupported. The use of UNMAP is limited to Thin provisioned volumes. So, need to check if the the LUNs are thin provisioned or not:
 

[root@ESXi:~] esxcli storage core device list -d naa.<WWN>
   <Output is truncated>
   .
   .
   Thin Provisioning Status: unknown <<<<<<< It means that the LUNs are thick provisioned





 

Cause

Versjonen som kjører på VPlex støtter ikke «unmap»-funksjonen for Unity. 

ELLER

hvis VPlex kjører på versjonen som støtter UNMAP-funksjonen for Unity, er årsaken at LUN-ene er tykke klargjort eller at LUN-ene er tynnklargjort på Unity, men tynnaktivert-funksjonen på VPlex virtuelt volum er deaktivert.

Resolution

Hvis VPlex ikke kjører på versjonen som støtter UNMAP-funksjonen for Unity. Kunden skal oppgradere VPlex til 6.0 SP 1, som støtter tynn UNMAP.

Ellers,

sjekker på VPlex

: 1. Kontroller om lagringsvolumet som leveres til VPlex, er tynt kompatibelt:
 

VPlexcli:/clusters/cluster-1/storage-elements/storage-volumes> ll Name VPD83 ID Capacity Use Vendor IO Status Type Thin Provision Thin --------------------------------- ------------------------ -------- --------- ------- ----------- ----------- Rebuild Type Capable --------------------------------- ------------------------ -------- --------- ------- ----------- ----------- ------- --------- ------- VPD83T3:514f0c5b94e0002c VPD83T3:514f0c5b94e0002c 15G used Unity alive normal false legacy true


2. Kontroller om tynn aktivert funksjon på VPlex virtuelt volum er aktivert:

VPlexcli:/clusters/cluster-1/virtual-volumes/testvolume_vol>  ll
Name Value
-------------------------- ----------------------------------------
block-count 3932160
block-size 4K
cache-mode synchronous
capacity 15G
consistency-group -
expandable true
expandable-capacity 0B
expansion-method storage-volume
expansion-status -
health-indications []
health-state ok
locality local
operational-status ok
recoverpoint-protection-at []
recoverpoint-usage -
scsi-release-delay 0
service-status running
storage-tier -
supporting-device testvolume
system-id testvolume_vol
thin-capable true
thin-enabled disabled <--- thin enabled is not set!!
volume-type virtual-volume
vpd-id VPD83T3:6000144000000010b021768279d4285d
 
3. Aktiver tynnfunksjonen på det virtuelle volumet hvis den er deaktivert:

VPlexcli:/clusters/cluster-1/virtual-volumes/testvolume_vol>set thin-enabled 1

Sjekker på ESXi : 

4. Skann lagring på ESXi-serveren. Det kan gjøres både via kommandolinje og VCenter.

[root@ESXi:/] esxcli storage core adapter rescan --all

5. Kjør kommandoen for lagringskjernebane mot VPlex virtual-volume Naa id i:

[root@ESXi:/] esxcli storage core path list
fc.20000024ff548aa8:21000024ff548aa8-fc.5000144047b02176:50001442d0217600-naa.6000144000000010b021768279d4285d
UID: fc.20000024ff548aa8:21000024ff548aa8-fc.5000144047b02176:50001442d0217600-naa.6000144000000010b021768279d4285d
Runtime Name: vmhba2:C0:T3:L0
Device: naa.6000144000000010b021768279d4285d
Device Display Name: EMC Fibre Channel Disk (naa.6000144000000010b021768279d4285d)
Adapter: vmhba2
Channel: 0
Target: 3
LUN: 0
Plugin: NMP
State: active
Transport: fc
Adapter Identifier: fc.20000024ff548aa8:21000024ff548aa8
Target Identifier: fc.5000144047b02176:50001442d0217600
Adapter Transport Details: WWNN: 20:00:00:24:ff:54:8a:a8 WWPN: 21:00:00:24:ff:54:8a:a8
Target Transport Details: WWNN: 50:00:14:40:47:b0:21:76 WWPN: 50:00:14:42:d0:21:76:00
Maximum IO Size: 33553920Get Vplex virtual volume NAA

6. Før du oppretter partisjon eller datalager på volumet, kan ESXi ikke få Thin Provisioning status for dette volumet, og dermed fortsatt rapporterer at funksjonen ikke støttes: 
 
[root@ESXi:/] esxcli storage core device vaai status get -d naa.6000144000000010b021768279d4285d
naa.6000144000000010b021768279d4285d
VAAI Plugin Name:
ATS Status: supported
Clone Status: supported
Zero Status: supported
Delete Status: unsupported

[root@ESXi:/] esxcli storage core device list -d naa.6000144000000010b021768279d4285d
naa.6000144000000010b021768279d4285d
Display Name: EMC Fibre Channel Disk (naa.6000144000000010b021768279d4285d)
Has Settable Display Name: true
Size: 15360
Device Type: Direct-Access
Multipath Plugin: NMP
Devfs Path: /vmfs/devices/disks/naa.6000144000000010b021768279d4285d
Vendor: EMC
Model: Invista
Revision: 5520
SCSI Level: 4
Is Pseudo: false
Status: on
Is RDM Capable: true
Is Local: false
Is Removable: false
Is SSD: false
Is VVOL PE: false
Is Offline: false
Is Perennially Reserved: false
Queue Full Sample Size: 0
Queue Full Threshold: 0
Thin Provisioning Status: unknown
Attached Filters:
VAAI Status: supported
Other UIDs: vml.02000000006000144000000010b021768279d4285d496e76697374
Is Shared Clusterwide: true
Is Local SAS Device: false
Is SAS: false
Is USB: false
Is Boot USB Device: false
Is Boot Device: false
Device Max Queue Depth: 64
No of outstanding IOs with competing worlds: 32
Drive Type: unknown
RAID Level: unknown
Number of Physical Drives: unknown
Protection Enabled: false
PI Activated: false
PI Type: 0
PI Protection Mask: NO PROTECTION
Supported Guard Types: NO GUARD SUPPORT
DIX Enabled: false
DIX Guard Type: NO GUARD SUPPORT
Emulated DIX/DIF Enabled: false

7. Opprett datalager på volumet eller opprett partisjonstabell manuelt for volumet, status for tynn klargjøring vil endres til ja og unmap vil 'endre til støttet'.

[root@ESXi:/] esxcli storage core device list -d naa.6000144000000010b021768279d4285d
Is VVOL PE: false
Is Offline: false
Is Perennially Reserved: false
Queue Full Sample Size: 0
Queue Full Threshold: 0
Thin Provisioning Status: yes

[root@ESXi:/] esxcli storage core device vaai status get -d naa.6000144000000010b021768279d4285d
naa.6000144000000010b021768279d4285d
VAAI Plugin Name:
ATS Status: supported
Clone Status: supported
Zero Status: supported
Delete Status: supported

8. Etter å ha utført trinnene ovenfor, hvis ESXi fortsatt ikke oppdaterer unmap-statusen, kan du se etter VMware KBA og undersøke fra ESXi-siden.

Additional Information

Se dokumentet nedenfor:

https://support.emc.com/docu81003_VPLEX-GeoSynchrony-6.0-Service-Pack-1-and-Patches--Release-Notes.pdf?language=en_US

Affected Products

Dell EMC Unity Family

Products

Dell Unity 300, Dell EMC Unity 300F, Dell EMC Unity 350F, Dell EMC Unity XT 380, Dell EMC Unity XT 380F, Dell EMC Unity 400, Dell EMC Unity 400F, Dell EMC Unity 450F, Dell EMC Unity XT 480, Dell EMC Unity XT 480F, Dell EMC Unity 500 , Dell EMC Unity 500F, Dell EMC Unity 550F, Dell EMC Unity 600, Dell EMC Unity 600F, Dell EMC Unity 650F, Dell EMC Unity XT 680, Dell EMC Unity XT 680F, Dell EMC Unity XT 880F, Dell EMC Unity Family |Dell EMC Unity All Flash, Dell EMC Unity Family, Dell EMC Unity Hybrid ...
Article Properties
Article Number: 000055352
Article Type: Solution
Last Modified: 24 Jul 2025
Version:  4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.