PowerPath: PowerPath 명령 powermt display가 AIX VIOS 환경에서 응답을 멈춤
Summary: 이 문서에서는 AIX VIOS 환경에서 PowerPath 명령 powermt 디스플레이의 응답이 중지되는 경우의 솔루션에 대해 설명합니다.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
PowerPath 명령(예: powermt display, powermt config 응답을 중지합니다.
명령 cfgmgr 응답을 중지합니다.
실패한 명령을 따르기 위해 추적을 사용하려고 시도하면 실패합니다.
dbx도 응답을 중지합니다.
Cause
PowerPath 6.4에서 종속 semaphore의 잘못된 읽기/쓰기 모드가 이 문제의 원인입니다.
PowerPath 6.4에서 종속 semaphore의 모드가 쓰기 모드로 설정되었습니다.
Resolution
이 문제의 해결 방법은 PowerPath를 버전 7.0 이상으로 업그레이드하는 것입니다.
참고: emcp_mond를 비활성화하는 것도 영향을 받기 때문에 해결 방법으로 사용할 수 없습니다.
Additional Information
환경:
어레이: VMAX 250F
호스트: IBM 9179-MHD
AIX: 6100-09-03-1415(EOSL)
VIO: 2.2.6.21: NPIV 서버, vSCSI 서버
PowerPath: 6.4
Article Properties
Article Number: 000195987
Article Type: Solution
Last Modified: 17 Nov 2023
Version: 5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.