Standaardconsole-instellingen van Dell EMC Networking voor switches uit de PowerConnect-serie, X-serie, N-serie, ON-serie, Chassis-serie en S-serie
Welke baudsnelheid is nodig om verbinding te maken met mijn Dell Switch
Summary:Welke baudsnelheid is nodig om verbinding te maken met mijn Dell Switch
This article may have been automatically translated. If you have any feedback regarding its quality, please let us know using the form at the bottom of this page.
Article Content
Instructions
In dit artikel worden de standaardconsole-instellingen van de volgende switch-series weergegeven:
Stel de data format (dataformattering) in op 8 bits, stop bits op 1, en no parity (geen pariteit)
Stel flow control (flowbesturing) in op none (geen)
De S4048-ON Switch heeft verschillende standaardinstellingen voor de Micro-USB-console en de RS-232-console.
Micro-USB: Datasnelheid tot 9600 baud
Stel de data format (dataformattering) in op 8 bits, stop bits op 1, en no parity (geen pariteit)
Stel flow control (flowbesturing) in op none (geen)
RS-232-console:
Datasnelheid tot 115200 baud
Stel de data format (dataformattering) in op 8 bits, stop bits op 1, en no parity (geen pariteit)
Stel flow control (flowbesturing) in op none (geen)
Stel de data format (dataformattering) in op 8 bits, stop bits op 1, en no parity (geen pariteit)
Stel flow control (flowbesturing) in op none (geen)
Opmerking: Selecteer onder Properties (Eigenschappen) VT100 voor de emulatiemodus. Bij veel emulators wordt dit standaard gebruikt en de locatie van deze instelling verschilt per terminalemulator.