CloudBoost: NTP-configuratie controleren
Summary: In dit artikel wordt uitgelegd hoe u NTP-instellingen voor CloudBoost kunt controleren.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
Het controleren van NTP-instellingen is essentieel voor services die gevoelig zijn voor scheefstand van de klok binnen CloudBoost.
NTP-instellingen kunnen handmatig worden gecontroleerd via de CloudBoost opdrachtregel (CLI):
- Meld u aan bij de CloudBoost CLI met de beheerder.
- Voer het commando '
diagnostics ntpcheck'.
CloudBoost valideert vervolgens de NTP-instellingen en probeert te synchroniseren.
Details over de CloudBoost NTP-instellingen zijn ook te vinden door '
diagnostics ntpcheck advanced'.
Voorbeeld:
admin@mag-fs> diagnostics ntpcheck advanced
NTP query details
=================
associd=0 status=c011 leap_alarm, sync_unspec, 1 event, freq_not_set,
version="ntpd 4.2.6p5@1.2349-o Mon Apr 13 13:39:46 UTC 2015 (1)",
processor="x86_64", system="Linux/3.16.0-59-generic", leap=11,
stratum=16, precision=-22, rootdelay=0.000, rootdisp=22443.660,
refid=INIT, reftime=00000000.00000000 Mon, Jan 1 1900 0:00:00.000,
clock=de35fe44.4214ed43 Tue, Feb 20 2018 1:54:12.258, peer=0, tc=3,
mintc=3, offset=0.000, frequency=0.000, sys_jitter=0.000,
clk_jitter=0.000, clk_wander=0.000
remote refid st t when poll reach delay offset jitter
==============================================================================
<IP_ADDRESS> .INIT. 16 u - 1024 0 0.000 0.000 0.000Additional Information
Het '
ntpcheck' is alleen beschikbaar in CloudBoost 2.1.x en hoger.
Affected Products
CloudBoost, CloudBoost Virtual ApplianceArticle Properties
Article Number: 000010806
Article Type: How To
Last Modified: 11 Jun 2026
Version: 5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.