CloudBoost：检查 NTP 配置

Summary: 本文介绍如何检查 CloudBoost 的 NTP 设置。

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions

检查 NTP 设置对于对 CloudBoost 中的时钟偏差敏感的服务至关重要。
 
可以在 CloudBoost 命令行 （CLI） 中手动检查 NTP 设置：
  1. 以管理员用户身份登录 CloudBoost CLI。
  2. 运行命令 'diagnostics ntpcheck'.
CloudBoost 随后会验证 NTP 设置并尝试进行同步。
 
有关 CloudBoost NTP 设置的详细信息，还可以通过运行”diagnostics ntpcheck advanced'.
 
示例：
admin@mag-fs> diagnostics ntpcheck advanced

NTP query details
=================
associd=0 status=c011 leap_alarm, sync_unspec, 1 event, freq_not_set,
version="ntpd 4.2.6p5@1.2349-o Mon Apr 13 13:39:46 UTC 2015 (1)",
processor="x86_64", system="Linux/3.16.0-59-generic", leap=11,
stratum=16, precision=-22, rootdelay=0.000, rootdisp=22443.660,
refid=INIT, reftime=00000000.00000000  Mon, Jan  1 1900  0:00:00.000,
clock=de35fe44.4214ed43  Tue, Feb 20 2018  1:54:12.258, peer=0, tc=3,
mintc=3, offset=0.000, frequency=0.000, sys_jitter=0.000,
clk_jitter=0.000, clk_wander=0.000

remote           refid      st t when poll reach   delay   offset  jitter
==============================================================================
<IP_ADDRESS>   .INIT.       16 u    - 1024    0    0.000    0.000   0.000

Additional Information

这 'ntpcheck“命令仅在 CloudBoost 2.1.x 及更高版本中可用。

Affected Products

CloudBoost, CloudBoost Virtual Appliance
Article Properties
Article Number: 000010806
Article Type: How To
Last Modified: 11 Jun 2026
Version:  5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.