VPLEX：未对齐的已启用 RP 的一致性组

从 运行运行状况检查后 VPlexcli，请注意 mis-aligned RP-enabled consistency groups：

RecoverPoint:
-------------
Cluster    Total        Unhealthy    Total       Unhealthy   Total        Mis-aligned  Total           Unhealthy
Name       RP Clusters  RP Clusters  Replicated  Replicated  RP-enabled   RP-enabled   Registered      RP Storage
                                     Virtual     Virtual     Consistency  Consistency  RP Initiators/  Views
                                     Volumes     Volumes     Groups       Groups       Storage Views
---------  -----------  -----------  ----------  ----------  -----------  -----------  --------------  ----------
cluster-1  2            0            0           0           23           3            16/2            0

运行命令 rp validate-configuration 从 VPlexcli 以获取未对齐的 CG 名称。您会看到以下信息，指示 CG 存在问题：

Validating that RecoverPoint enabled VPLEX consistency groups are aligned with RecoverPoint consistency groups        ERROR
3 consistency group(s) are not aligned:


         VPlexcli:/> rp validate-configuration         

         3 consistency group(s) are not aligned:
         Test_WIN_CG
         Test_ESX_CG
         Test_SUN_CG

VPlexcli:/clusters/cluster-1/consistency-groups/Test_WIN_CG> ll

Attributes:
Name                  Value
--------------------  ---------------------------------------------------------
active-clusters       []
cache-mode            synchronous
detach-rule           -
operational-status    [(cluster-1,{ summary:: ok, details:: [] })]
passive-clusters      []
read-only             false
recoverpoint-enabled  true
storage-at-clusters   [cluster-1]
virtual-volumes       [device_VNX1234_ABCDEFGHIJKL_LUN16_272_1_vol,
                      device_VNX1234_ABCDEFGHIJKL_LUN17_272_1_vol,
                      device_VNX1234_ABCDEFGHIJKL_LUN20_272_1_vol]
visibility            [cluster-1]


Contexts:
Name          Description
------------  -----------
advanced      -
recoverpoint  -


VPlexcli:/clusters/cluster-1/consistency-groups/Test_WIN_CG> cd recoverpoint/    <---- go into this context to view the virtual-volumes

VPlexcli:/clusters/cluster-1/consistency-groups/Test_WIN_CG/recoverpoint> ll

Name                               Value
---------------------------------  -----------------------------------------------------------------------------------------------------------------
active-replicating-rp-cluster      []
preferred-cluster                  []
protection-type                    [Remote Replication]
recoverpoint-information           [(device_VNX1234_ABCDEFGHIJKL_LUN16_272_1_vol,TEST_WIN_CG,10.116.93.15,Remote
                                   Replica),
                                   (device_VNX1234_ABCDEFGHIJKL_LUN17_272_1_vol,TEST_WIN_CG,10.116.93.15,Remote
                                   Replica),
                                   (device_VNX1234_ABCDEFGHIJKL_LUN20_272_1_vol,TEST_WIN_CG,10.116.93.15,Remote
                                   Replica),]
vplex-rp-cg-alignment-indications  [Virtual Volumes in this VPlex consistency group exist in different RecoverPoint consistency groups:
                                   OLD_TEST_WIN_CG and TEST_WIN_CG
vplex-rp-cg-alignment-status       error

vplex-rp-cg-alignment-indications  [Virtual Volumes in this VPlex consistency group exists in different RecoverPoint consistency groups:
                                   OLD_TEST_WIN_CG and TEST_WIN_CG.

'device_CLARiiON1234_LUN8989_1_vol' is not in a RecoverPoint consistency group and is not being protected.

Advise customer to add this device(s) to a RecoverPoint consistency group.

• VPLEX 一致性组中的虚拟卷存在于不同的 RecoverPoint 一致性组中，或者虚拟卷位于 VPLEX CG 中但不在 RecoverPoint CG 中，这时会出现配置问题。
• VPLEX 虚拟卷只能位于一个 RecoverPoint CG 中。用户必须在 RecoverPoint 上从 CG 中删除虚拟卷。
• 对于显示虚拟卷处于 RP-enabled VPLEX CG，但不在 RecoverPoint CG 中，用户必须将 VPLEX 虚拟卷放入 RecoverPoint CG 中，或从 VPLEX CG 中删除虚拟卷

• 向用户提供此信息。
• 请求用户解决 CG 配置问题。