Routing NSX: Verifica delle route DLR
Summary: Poiché molti casi NSX vengono forniti con una descrizione del problema che indica semplicemente "problemi di routing", questo articolo ha lo scopo di aiutare a definire in modo più accurato il tipo di problema di routing che si sta verificando. ...
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
Procedimento:
Dopo aver stabilito che un DLR è presente e integro e include tutte le LIF, la successiva cosa da controllare è la tabella di routing.
- Dalla shell di NSX Manager, eseguire il comando seguente per ottenere l'ID del cluster:
show cluster all
- Eseguire il seguente comando per ottenere l'ID host:
show cluster cluster-id
- Eseguire il seguente comando per ottenere dlrID (nome Vdr):
show logical-router host hostID dlr all brief
- Eseguire il seguente comando per ottenere le informazioni sullo stato di tutte le interfacce:
show logical-router host hostID dlr dlrID route
Esempio:
nsxmgr# show logical-router host hostID dlr dlrID route VDR default+edge-1:1460487509 Route Table Legend: [U: Up], [G: Gateway], [C: Connected], [I: Interface] Legend: [H: Host], [F: Soft Flush] [!: Reject] [E: ECMP] Destination GenMask Gateway Flags Ref Origin UpTime Interface ----------- ------- ------- ----- --- ------ ------ --------- 0.0.0.0 0.0.0.0 192.168.10.1 UG 1 AUTO 10068944 570d455500000002 172.16.10.0 255.255.255.0 0.0.0.0 UCI 1 MANUAL 10068944 570d45550000000a 172.16.20.0 255.255.255.0 0.0.0.0 UCI 1 MANUAL 10068944 570d45550000000b 172.16.30.0 255.255.255.0 0.0.0.0 UCI 1 MANUAL 10068944 570d45550000000c 192.168.10.0 255.255.255.248 0.0.0.0 UCI 1 MANUAL 10068944 570d455500000002
Affected Products
VxBlock and Vblock Systems, ScaleIOArticle Properties
Article Number: 000206931
Article Type: How To
Last Modified: 16 Jun 2025
Version: 2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.