PowerEdge: IMC를 통해 인텔 E2100-CCQDA2를 재부팅하면 서버가 재부팅됨
Summary: IMC(Infrastructure Management Controller)를 통해 인텔 IPU(Infrastructure Processing Unit)를 재부팅하면 전체 서버가 재부팅됩니다.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
MIC(Management Interface Card)를 사용하는 동안 IMC를 통해 인텔 IPU를 재부팅하면 전체 서버가 재부팅됩니다.
이 문제는 iDRAC 콘솔 "connect dpu1"을 통해 IPU에 액세스하는 경우에만 발생합니다.
이 문제는 iDRAC 콘솔 "connect dpu1"을 통해 IPU에 액세스하는 경우에만 발생합니다.
Cause
IPU가 재부팅을 시도하지만 재설정에 실패하면 드라이버가 오류 처리의 일환으로 재설정 상태를 지웁니다. 이로 인해 드라이버가 재설정 상태에 의존하여 통계 작업을 예약하기 때문에 문제가 발생합니다.
Resolution
이 문제는 IPU 소프트웨어 릴리스 1.7.0에서 해결되었습니다. 이 문제를 해결하려면 최신 버전으로 업데이트하십시오.
Affected Products
PowerEdge, Intel PRO Family of AdaptersArticle Properties
Article Number: 000226967
Article Type: Solution
Last Modified: 09 Jul 2025
Version: 4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.