IDPA: Knooppuntgebeurtenisservice is aangetast door een duplicaat Route 169.254.0.1

Summary: Het antwoord in de cache met knooppuntgebeurtenisservice is uitgeschakeld. Node Event Service is in Degraded vanwege een duplicaat Route 169.254.0.1.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

RUCK Precheck Failure firmware_readiness:

[ERROR] Firmware pre-upgrade checks failed. [ 10.100.XX.XXX ]: The cached response with Node Event Service is disabled.
Node Event Service is in a degraded state,iDRAC Service Module is not available/active at this time.
Check iDRAC Service Module/iDRAC status.

Bij het uitvoeren van de onderstaande opdracht, zal idraccache een fout vertonen of verslechteren.
 

[root@idpa-esx1:~] /opt/dell/DellPTAgent/tools/pta_call get agent/info
Request sent to DellPTAgent @ https://192.168.100.101:8086
{
    "libstorelibit.so": "07.05",
    "uptime": "177266 seconds ( 2 days 1 hour 14 minutes 26 seconds )",
    "host_pass_thru_ip": "169.254.0.2",
    "ism_version": "3.6.0",
    "model": "R640 IDPA",
    "os_version": "6.7.0 build-17700523",
    "process_id": "2101654",
    "libstorelibir-3.so": "15.03-0",
    "default_server_cert": "true",
    "TPM Present": "false",
    "MarvellLibraryVersion": "5.0.13.1109",
    "servicetag": "D3WCCD3",
    "mfr": "Dell Inc.",
    "system_uuid": "62dcf7ee-334e-8f96-f507-78ac4426a310",
    "status": {
        "iSM": "N/A",
        "agent": "Error/degraded",
        "idracConnection": "OK",
        "idraccache": "Error/degraded"

De iSM wordt uitgevoerd, maar kan niet communiceren met de debuglogboeken van iDRAC:

PTAgent /scratch/log/pta_debug.log

2023/10/23 14:29:33[UTC] [19394369:246258496] WARN  - WSManClient::isValidResponse: Http request to host: 169.254.0.1, failed with status code: -4
2023/10/23 14:29:34[UTC] [19394369:246786880] WARN  - WSManClient::isValidResponse: Http request to host: 169.254.0.1, failed with status code: -4
2023/10/23 14:29:34[UTC] [19394369:246258496] WARN  - ISMMonitor::isISMServiceRunning: Command to check iSM status failed with error code <2>. <ism is active (running limited functionality)


 

Cause

Deze extra route wordt gemaakt op de host-besturingssysteemlaag en is gebaseerd op bestaande netwerkconfiguratie. Dit gedrag wordt vaak gezien wanneer meerdere statische routes zijn gedefinieerd in de ESXi-configuratie.

Mogelijke oorzaken zijn het gebruik van een interne SSH-tunnel van ESXi naar iDRAC.

iSM maakt de extra routes niet, noch detecteert en herstelt geen extra gedefinieerde routes.

Resolution

OPMERKING: Er is een oplossing voor dit probleem toegevoegd aan de goidpa-tool, volg de onderstaande KB om goidpa te installeren:
PowerProtect Data Protection Appliance: GoIDPA-tool
Voer vervolgens de volgende opdrachten uit op de ACM: 
To check this ptagent run:
./goidpa esx ptagent check

To fix issues with ptagent run:
./goidpa esx ptagent fix

 

OPMERKING: Als het probleem zich blijft voordoen, neemt u contact op met Dell Support voor verdere hulp.

Additional Information

Als de goidpa-automatisering mislukt, vindt u hieronder het handmatige proces voor deze tijdelijke oplossing:
 
LET OP: Verwijder de route 169.254.0.1/32 uit vmk0 alleen. Een andere route verwijderen uit vmk0 of een 169.254.xx.xx route verwijderen uit een andere route vmk kan andere routeringsproblemen veroorzaken.
  1. Bevestig een ongeldige invoer in de ESXi-routeringstabel, waardoor de iSM die 169.254.0.2 gebruikt niet kan communiceren met iDRAC's 169.254.0.1.

Hieronder ziet u een voorbeeld van een netwerkomgeving met dit probleem. De vmk0 Gatewayadres van de interface voor een extra route voor netwerk 169.254.0.1/32.

[root@idpa-esxi:~] esxcli network ip route ipv4 list
Network         Netmask          Gateway        Interface  Source
--------------  ---------------  -------------  ---------  ------
default             0.0.0.0                10.100.10.254   vmk0       MANUAL
10.100.10.0     255.255.255.0    0.0.0.0               vmk0       MANUAL
169.254.0.0     255.255.255.0    0.0.0.0               vmk2       MANUAL
169.254.0.1     255.255.255.255  10.100.xx.xxx  vmk0       MANUAL
192.168.100.96  255.255.255.224  0.0.0.0          vmk1       MANUAL
  1. Verwijder de vermelding om het routeringsprobleem tussen iSM en iDRAC op te lossen.
esxcli network ip route ipv4 remove -g 10.100.xx.xxx -n 169.254.0.1/32
  1. Item is verwijderd:
[root@idpa-esxi:~] esxcli network ip route ipv4 list
Network         Netmask          Gateway        Interface  Source
--------------  ---------------  -------------  ---------  ------
default             0.0.0.0                10.100.10.254   vmk0       MANUAL
10.100.10.0     255.255.255.0    0.0.0.0               vmk0       MANUAL
169.254.0.0     255.255.255.0    0.0.0.0               vmk2       MANUAL
192.168.100.96  255.255.255.224  0.0.0.0          vmk1       MANUAL
  1. Zodra de extra route is verwijderd, start u PTAgent en de iSM-service opnieuw.
/etc/init.d/DellPTAgent restart
/etc/init.d/dcism-netmon-watchdog restart
  1. Voer firmwaregereedheid uit om SUCCES te bevestigen

DP4400:

curl -k -i -H "Content-Type:application/json" -X POST  https://localhost:8039/dpatools/api/v1/firmware/readinesscheck -d '{"idpaVersion": "2.7", "isRack": false, "hostList": [{"hostIP": "192.168.100.101", "esxiUser": "root", "esxiPassword": "IDPAPASSWORD"}]}'

IDPAPASSWORD = IDPA common password

Voorbeeld:

curl -k -i -H "Content-Type:application/json" -X POST  https://localhost:8039/dpatools/api/v1/firmware/readinesscheck -d '{"idpaVersion": "2.7", "isRack": false, "hostList": [{"hostIP": "192.168.100.101", "esxiUser": "root", "esxiPassword": "Idpa_12345"}]}'

Uitvoer:

HTTP/1.1 200
Access-Control-Allow-Origin: *
Access-Control-Allow-Methods: POST, PUT, GET, OPTIONS, DELETE
Access-Control-Max-Age: 3600
Access-Control-Allow-Headers: Origin, X-Requested-With, Content-Type, Accept
Content-Type: application/json
Transfer-Encoding: chunked
Date: Sun, 05 Nov 2023 01:38:41 GMT

[{"id":814402494717874004,"hostIP":"192.168.100.101","result":"SUCCESS","agentIdracDataCached":true,"agentIsOverallReady":true,"agentIsRunning":true,"agentVersionIsOk":true,"idracInRecoveryMode":false,"idracIsAvailable":true,"idracIsReady":true,"idracLcJobQueueIsClear":true,"ismIsEnabled":true,"ismIsReady":true,"firmwareIsValid":true,"twoHopIsRequired":false,"invalidFirmwareList":[],"messages":"The IDPA system is ready for firmware update.","links":[]}]

DP5x00/DP8x00:

for i in {1..3}; do curl -k -i -H "Content-Type:application/json" -X POST https://localhost:8039/dpatools/api/v1/firmware/readinesscheck -d '{"idpaVersion": "2.7", "isRack": true, "hostList": [{"hostIP": "192.168.100.10'${i}'", "esxiUser": "root", "esxiPassword": "IDPAPASSWORD"}]}'; done

IDPAPASSWORD = IDPA common password

Voorbeeld:

for i in {1..3}; do curl -k -i -H "Content-Type:application/json" -X POST https://localhost:8039/dpatools/api/v1/firmware/readinesscheck -d '{"idpaVersion": "2.7", "isRack": true, "hostList": [{"hostIP": "192.168.100.10'${i}'", "esxiUser": "root", "esxiPassword": "Idpa_12345"}]}'; done

Uitvoer:

HTTP/1.1 200
Access-Control-Allow-Origin: *
Access-Control-Allow-Methods: POST, PUT, GET, OPTIONS, DELETE
Access-Control-Max-Age: 3600
Access-Control-Allow-Headers: Origin, X-Requested-With, Content-Type, Accept
Content-Type: application/json
Transfer-Encoding: chunked
Date: Sun, 05 Nov 2023 01:39:05 GMT

[{"id":2337625064092707360,"hostIP":"192.168.100.101","result":"SUCCESS","agentIdracDataCached":true,"agentIsOverallReady":true,"agentIsRunning":true,"agentVersionIsOk":true,"idracInRecoveryMode":false,"idracIsAvailable":true,"idracIsReady":true,"idracLcJobQueueIsClear":true,"ismIsEnabled":true,"ismIsReady":true,"firmwareIsValid":false,"twoHopIsRequired":false,"invalidFirmwareList":[{"name":"Integrated Remote Access Controller","currentVersion":"3.36.103.36","minimumRequiredVersion":"4.40.10.00"}],"messages":"The IDPA system is ready for firmware update.","links":[]}]HTTP/1.1 200
Access-Control-Allow-Origin: *
Access-Control-Allow-Methods: POST, PUT, GET, OPTIONS, DELETE
Access-Control-Max-Age: 3600
Access-Control-Allow-Headers: Origin, X-Requested-With, Content-Type, Accept
Content-Type: application/json
Transfer-Encoding: chunked
Date: Sun, 05 Nov 2023 01:39:44 GMT

[{"id":1389413431580575643,"hostIP":"192.168.100.102","result":"SUCCESS","agentIdracDataCached":true,"agentIsOverallReady":true,"agentIsRunning":true,"agentVersionIsOk":true,"idracInRecoveryMode":false,"idracIsAvailable":true,"idracIsReady":true,"idracLcJobQueueIsClear":true,"ismIsEnabled":true,"ismIsReady":true,"firmwareIsValid":true,"twoHopIsRequired":false,"invalidFirmwareList":[],"messages":"The IDPA system is ready for firmware update.","links":[]}]HTTP/1.1 200
Access-Control-Allow-Origin: *
Access-Control-Allow-Methods: POST, PUT, GET, OPTIONS, DELETE
Access-Control-Max-Age: 3600
Access-Control-Allow-Headers: Origin, X-Requested-With, Content-Type, Accept
Content-Type: application/json
Transfer-Encoding: chunked
Date: Sun, 05 Nov 2023 01:40:19 GMT

[{"id":1184184063038749065,"hostIP":"192.168.100.103","result":"SUCCESS","agentIdracDataCached":true,"agentIsOverallReady":true,"agentIsRunning":true,"agentVersionIsOk":true,"idracInRecoveryMode":false,"idracIsAvailable":true,"idracIsReady":true,"idracLcJobQueueIsClear":true,"ismIsEnabled":true,"ismIsReady":true,"firmwareIsValid":true,"twoHopIsRequired":false,"invalidFirmwareList":[],"messages":"The IDPA system is ready for firmware update.","links":[]}]

 

 

Controleer de cachestatus door de onderstaande opdracht uit te voeren:

/opt/dell/DellPTAgent/tools/pta_call get agent/info

Uitvoer:

Request sent to DellPTAgent @ https://192.168.100.101:8086
{
    "mfr": "Dell Inc.",
    "servicetag": "D3WCCD3",
    "host_epoch_time": "1699148602.56383 (secs.usecs)",
    "uptime": "204355 seconds ( 2 days 8 hours 45 minutes 55 seconds )",
    "system_uuid": "62dcf7ee-334e-8f96-f507-78ac4426a310",
    "model": "R640 IDPA",
    "process_id": "2101654",
    "libstorelibir-3.so": "15.03-0",
    "domain": "esx1-5800-crk.dp.ce.gslabs.lab.emc.com",
    "name": "esx1-5800-crk",
    "ptagentversion": "2.4.1-3",
    "idrac_ethernet_ip": "192.168.100.110",
    "os_version": "6.7.0 build-17700523",
    "ism_version": "3.6.0",
    "MarvellLibraryVersion": "5.0.13.1109",
    "libstorelib.so": "07.07",
    "host_pass_thru_ip": "169.254.0.2",
    "default_server_cert": "true",
    "status": {
        "iSM": "N/A",
        "agent": "OK",
        "idraccache": "OK",
        "idracConnection": "OK"
    },
    "idrac_pass_thru_ip": "169.254.0.1",
    "api_blocking_enabled": "false",
    "os": "VMWare ESXi",
    "rest_endpoints": "https://192.168.100.101:8086",
    "TPM Present": "false",
    "libstorelibit.so": "07.05"
}
Response: status: 200 [OK], size: 1063 bytes, latency: 0.144 seconds.

 

Affected Products

PowerProtect DP4400, PowerProtect DP5300, PowerProtect DP5800, PowerProtect DP8300, PowerProtect DP8800, Integrated Data Protection Appliance Family, Integrated Data Protection Appliance Software, PowerProtect DP5900, PowerProtect DP8400 , PowerProtect DP8900 ...
Article Properties
Article Number: 000219231
Article Type: Solution
Last Modified: 24 Apr 2025
Version:  7
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.