IDPA： 由于重复路由 169.254.0.1，节点事件服务处于降级状态

Summary: 节点事件服务的缓存响应处于禁用状态。由于重复路由 169.254.0.1，节点事件服务处于降级状态。

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

RUCK 预检查失败 firmware_readiness：

[ERROR] Firmware pre-upgrade checks failed. [ 10.100.XX.XXX ]: The cached response with Node Event Service is disabled.
Node Event Service is in a degraded state,iDRAC Service Module is not available/active at this time.
Check iDRAC Service Module/iDRAC status.

运行以下命令时，idraccache 将出错或降级。
 

[root@idpa-esx1:~] /opt/dell/DellPTAgent/tools/pta_call get agent/info
Request sent to DellPTAgent @ https://192.168.100.101:8086
{
    "libstorelibit.so": "07.05",
    "uptime": "177266 seconds ( 2 days 1 hour 14 minutes 26 seconds )",
    "host_pass_thru_ip": "169.254.0.2",
    "ism_version": "3.6.0",
    "model": "R640 IDPA",
    "os_version": "6.7.0 build-17700523",
    "process_id": "2101654",
    "libstorelibir-3.so": "15.03-0",
    "default_server_cert": "true",
    "TPM Present": "false",
    "MarvellLibraryVersion": "5.0.13.1109",
    "servicetag": "D3WCCD3",
    "mfr": "Dell Inc.",
    "system_uuid": "62dcf7ee-334e-8f96-f507-78ac4426a310",
    "status": {
        "iSM": "N/A",
        "agent": "Error/degraded",
        "idracConnection": "OK",
        "idraccache": "Error/degraded"

iSM 正在运行，但无法与 iDRAC：

PTAgent 调试日志通信 /scratch/log/pta_debug.log

2023/10/23 14:29:33[UTC] [19394369:246258496] WARN  - WSManClient::isValidResponse: Http request to host: 169.254.0.1, failed with status code: -4
2023/10/23 14:29:34[UTC] [19394369:246786880] WARN  - WSManClient::isValidResponse: Http request to host: 169.254.0.1, failed with status code: -4
2023/10/23 14:29:34[UTC] [19394369:246258496] WARN  - ISMMonitor::isISMServiceRunning: Command to check iSM status failed with error code <2>. <ism is active (running limited functionality)


 

Cause

此额外路由基于现有网络配置在主机作系统层创建。在 ESXi 配置中定义多个静态路由时，通常会出现此行为。

可能的原因包括使用从 ESXi 到 iDRAC 的内部 SSH 隧道。

iSM 不会创建额外路由，也不会检测和修复任何额外定义的路由。

Resolution

提醒：此问题的修复程序已添加到 goidpa 工具中，请按照以下知识库文章安装 goidpa：
PowerProtect 数据保护一体机：GoIDPA 工具
然后在 ACM 上运行以下命令： 
To check this ptagent run:
./goidpa esx ptagent check

To fix issues with ptagent run:
./goidpa esx ptagent fix

 

提醒：如果问题仍然存在，请联系戴尔支持以获得进一步的帮助。

Additional Information

如果 goidpa 自动化失败，以下是此解决方法的手动过程：
 
注意：从 中删除 169.254.0.1/32 路由 vmk0 只。从 vmk0 中删除任何其他路由或从任何其他路由中删除 169.254.xx.xx 路由 vmk 可能会导致其他路由问题。
  1. 确认 ESXi 路由表中的条目无效，这会阻止 iSM 使用 169.254.0.2 与 iDRAC 的 169.254.0.1 通信。

下面显示了遇到此问题的网络环境示例。如果您主要使用 CIFS/NFS 来写入备份，则应使用 vmk0 网络 169.254.0.1/32 额外路由的接口网关地址。

[root@idpa-esxi:~] esxcli network ip route ipv4 list
Network         Netmask          Gateway        Interface  Source
--------------  ---------------  -------------  ---------  ------
default             0.0.0.0                10.100.10.254   vmk0       MANUAL
10.100.10.0     255.255.255.0    0.0.0.0               vmk0       MANUAL
169.254.0.0     255.255.255.0    0.0.0.0               vmk2       MANUAL
169.254.0.1     255.255.255.255  10.100.xx.xxx  vmk0       MANUAL
192.168.100.96  255.255.255.224  0.0.0.0          vmk1       MANUAL
  1. 删除条目以修复 iSM 与 iDRAC 之间的路由问题。
esxcli network ip route ipv4 remove -g 10.100.xx.xxx -n 169.254.0.1/32
  1. 条目已被删除：
[root@idpa-esxi:~] esxcli network ip route ipv4 list
Network         Netmask          Gateway        Interface  Source
--------------  ---------------  -------------  ---------  ------
default             0.0.0.0                10.100.10.254   vmk0       MANUAL
10.100.10.0     255.255.255.0    0.0.0.0               vmk0       MANUAL
169.254.0.0     255.255.255.0    0.0.0.0               vmk2       MANUAL
192.168.100.96  255.255.255.224  0.0.0.0          vmk1       MANUAL
  1. 删除额外路由后，重新启动 PTAgent 和 iSM 服务。
/etc/init.d/DellPTAgent restart
/etc/init.d/dcism-netmon-watchdog restart
  1. 运行固件就绪性检查以确认成功

DP4400：

curl -k -i -H "Content-Type:application/json" -X POST  https://localhost:8039/dpatools/api/v1/firmware/readinesscheck -d '{"idpaVersion": "2.7", "isRack": false, "hostList": [{"hostIP": "192.168.100.101", "esxiUser": "root", "esxiPassword": "IDPAPASSWORD"}]}'

IDPAPASSWORD = IDPA common password

示例：

curl -k -i -H "Content-Type:application/json" -X POST  https://localhost:8039/dpatools/api/v1/firmware/readinesscheck -d '{"idpaVersion": "2.7", "isRack": false, "hostList": [{"hostIP": "192.168.100.101", "esxiUser": "root", "esxiPassword": "Idpa_12345"}]}'

输出：

HTTP/1.1 200
Access-Control-Allow-Origin: *
Access-Control-Allow-Methods: POST, PUT, GET, OPTIONS, DELETE
Access-Control-Max-Age: 3600
Access-Control-Allow-Headers: Origin, X-Requested-With, Content-Type, Accept
Content-Type: application/json
Transfer-Encoding: chunked
Date: Sun, 05 Nov 2023 01:38:41 GMT

[{"id":814402494717874004,"hostIP":"192.168.100.101","result":"SUCCESS","agentIdracDataCached":true,"agentIsOverallReady":true,"agentIsRunning":true,"agentVersionIsOk":true,"idracInRecoveryMode":false,"idracIsAvailable":true,"idracIsReady":true,"idracLcJobQueueIsClear":true,"ismIsEnabled":true,"ismIsReady":true,"firmwareIsValid":true,"twoHopIsRequired":false,"invalidFirmwareList":[],"messages":"The IDPA system is ready for firmware update.","links":[]}]

DP5x00/DP8x00：

for i in {1..3}; do curl -k -i -H "Content-Type:application/json" -X POST https://localhost:8039/dpatools/api/v1/firmware/readinesscheck -d '{"idpaVersion": "2.7", "isRack": true, "hostList": [{"hostIP": "192.168.100.10'${i}'", "esxiUser": "root", "esxiPassword": "IDPAPASSWORD"}]}'; done

IDPAPASSWORD = IDPA common password

示例：

for i in {1..3}; do curl -k -i -H "Content-Type:application/json" -X POST https://localhost:8039/dpatools/api/v1/firmware/readinesscheck -d '{"idpaVersion": "2.7", "isRack": true, "hostList": [{"hostIP": "192.168.100.10'${i}'", "esxiUser": "root", "esxiPassword": "Idpa_12345"}]}'; done

输出：

HTTP/1.1 200
Access-Control-Allow-Origin: *
Access-Control-Allow-Methods: POST, PUT, GET, OPTIONS, DELETE
Access-Control-Max-Age: 3600
Access-Control-Allow-Headers: Origin, X-Requested-With, Content-Type, Accept
Content-Type: application/json
Transfer-Encoding: chunked
Date: Sun, 05 Nov 2023 01:39:05 GMT

[{"id":2337625064092707360,"hostIP":"192.168.100.101","result":"SUCCESS","agentIdracDataCached":true,"agentIsOverallReady":true,"agentIsRunning":true,"agentVersionIsOk":true,"idracInRecoveryMode":false,"idracIsAvailable":true,"idracIsReady":true,"idracLcJobQueueIsClear":true,"ismIsEnabled":true,"ismIsReady":true,"firmwareIsValid":false,"twoHopIsRequired":false,"invalidFirmwareList":[{"name":"Integrated Remote Access Controller","currentVersion":"3.36.103.36","minimumRequiredVersion":"4.40.10.00"}],"messages":"The IDPA system is ready for firmware update.","links":[]}]HTTP/1.1 200
Access-Control-Allow-Origin: *
Access-Control-Allow-Methods: POST, PUT, GET, OPTIONS, DELETE
Access-Control-Max-Age: 3600
Access-Control-Allow-Headers: Origin, X-Requested-With, Content-Type, Accept
Content-Type: application/json
Transfer-Encoding: chunked
Date: Sun, 05 Nov 2023 01:39:44 GMT

[{"id":1389413431580575643,"hostIP":"192.168.100.102","result":"SUCCESS","agentIdracDataCached":true,"agentIsOverallReady":true,"agentIsRunning":true,"agentVersionIsOk":true,"idracInRecoveryMode":false,"idracIsAvailable":true,"idracIsReady":true,"idracLcJobQueueIsClear":true,"ismIsEnabled":true,"ismIsReady":true,"firmwareIsValid":true,"twoHopIsRequired":false,"invalidFirmwareList":[],"messages":"The IDPA system is ready for firmware update.","links":[]}]HTTP/1.1 200
Access-Control-Allow-Origin: *
Access-Control-Allow-Methods: POST, PUT, GET, OPTIONS, DELETE
Access-Control-Max-Age: 3600
Access-Control-Allow-Headers: Origin, X-Requested-With, Content-Type, Accept
Content-Type: application/json
Transfer-Encoding: chunked
Date: Sun, 05 Nov 2023 01:40:19 GMT

[{"id":1184184063038749065,"hostIP":"192.168.100.103","result":"SUCCESS","agentIdracDataCached":true,"agentIsOverallReady":true,"agentIsRunning":true,"agentVersionIsOk":true,"idracInRecoveryMode":false,"idracIsAvailable":true,"idracIsReady":true,"idracLcJobQueueIsClear":true,"ismIsEnabled":true,"ismIsReady":true,"firmwareIsValid":true,"twoHopIsRequired":false,"invalidFirmwareList":[],"messages":"The IDPA system is ready for firmware update.","links":[]}]

 

 

通过运行以下命令检查高速缓存状态：

/opt/dell/DellPTAgent/tools/pta_call get agent/info

输出：

Request sent to DellPTAgent @ https://192.168.100.101:8086
{
    "mfr": "Dell Inc.",
    "servicetag": "D3WCCD3",
    "host_epoch_time": "1699148602.56383 (secs.usecs)",
    "uptime": "204355 seconds ( 2 days 8 hours 45 minutes 55 seconds )",
    "system_uuid": "62dcf7ee-334e-8f96-f507-78ac4426a310",
    "model": "R640 IDPA",
    "process_id": "2101654",
    "libstorelibir-3.so": "15.03-0",
    "domain": "esx1-5800-crk.dp.ce.gslabs.lab.emc.com",
    "name": "esx1-5800-crk",
    "ptagentversion": "2.4.1-3",
    "idrac_ethernet_ip": "192.168.100.110",
    "os_version": "6.7.0 build-17700523",
    "ism_version": "3.6.0",
    "MarvellLibraryVersion": "5.0.13.1109",
    "libstorelib.so": "07.07",
    "host_pass_thru_ip": "169.254.0.2",
    "default_server_cert": "true",
    "status": {
        "iSM": "N/A",
        "agent": "OK",
        "idraccache": "OK",
        "idracConnection": "OK"
    },
    "idrac_pass_thru_ip": "169.254.0.1",
    "api_blocking_enabled": "false",
    "os": "VMWare ESXi",
    "rest_endpoints": "https://192.168.100.101:8086",
    "TPM Present": "false",
    "libstorelibit.so": "07.05"
}
Response: status: 200 [OK], size: 1063 bytes, latency: 0.144 seconds.

 

Affected Products

PowerProtect DP4400, PowerProtect DP5300, PowerProtect DP5800, PowerProtect DP8300, PowerProtect DP8800, Integrated Data Protection Appliance Family, Integrated Data Protection Appliance Software, PowerProtect DP5900, PowerProtect DP8400 , PowerProtect DP8900 ...
Article Properties
Article Number: 000219231
Article Type: Solution
Last Modified: 24 Apr 2025
Version:  7
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.