Avamar：Gen4T 硬體：LAN 參數資料不相符！問題可能已失敗。
Summary: Avamar Gen4T 硬體回報錯誤「LAN 參數資料不相符！Write 可能已失敗」，嘗試設定因連接埠已停用而導致的參數。
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
嘗試在 Avamar Gen4T 節點上變更遠端管理主控台 （RMC） 設定時回報錯誤：
ipmitool lan set 4 defgw ipaddr 10.0.0.1
Setting LAN Default Gateway IP to 10.0.0.1
LAN Parameter Data does not match! Write may have failed.Cause
Avamar Gen4T 節點上未啟用 RMC 連接埠。
這可以通過以 root 身份執行以下命令來確認：
警示：請確定輸入的命令語法正確無誤，如下所示：
ipmitool raw 0x30 0xf9
00 00 00
全為零表示 RMC 連接埠未啟用。
Resolution
跟隨 Avamar：如何在 Gen4T 節點上設定遠端管理主控台，以在 Avamar Gen4T 節點上啟用和設定 RMC 連接埠。
Affected Products
AvamarProducts
Avamar, Avamar Data Store Gen4TArticle Properties
Article Number: 000057643
Article Type: Solution
Last Modified: 22 Aug 2025
Version: 4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.