「VxRail:ESXiノードが孤立したNFSデータストアへの接続をランダムに試行する
Summary: 構成ファイルに情報が残っているため、ノードがマウント解除されたネットワーク ファイル共有(NFS)に接続しようとしています。
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
VxRAILクラスターからNFSデータストアをマウント解除した後、ESXiホストがNFS孤立共有に接続しようとするトレースがvmkernel.logに残り、多くの不要なログ情報が発生します。
cat vmkernel.log | grep -i nfs
2019-08-20T05:48:50.335Z cpu29:2098455)WARNING: NFS: 221: Got error 13 from mount call
2019-08-20T05:49:20.340Z cpu21:2098455)WARNING: NFS: 221: Got error 13 from mount call
2019-08-20T05:49:50.348Z cpu12:2098455)WARNING: NFS: 221: Got error 13 from mount call
2019-08-20T05:50:20.373Z cpu17:2098455)WARNING: NFS: 221: Got error 13 from mount call
2019-08-20T05:50:50.379Z cpu28:2098455)WARNING: NFS: 221: Got error 13 from mount call
2019-08-20T05:51:20.386Z cpu8:2098455)WARNING: NFS: 221: Got error 13 from mount call
2019-08-20T05:51:50.393Z cpu31:2098455)WARNING: NFS: 221: Got error 13 from mount call
2019-08-20T05:52:20.400Z cpu1:2098455)WARNING: NFS: 221: Got error 13 from mount call
2019-08-20T05:52:50.408Z cpu24:2098455)WARNING: NFS: 221: Got error 13 from mount call
2019-08-20T05:53:20.421Z cpu29:2098455)WARNING: NFS: 221: Got error 13 from mount call
2019-08-20T05:53:50.427Z cpu31:2098455)WARNING: NFS: 221: Got error 13 from mount call
2019-08-20T05:54:20.432Z cpu11:2098455)WARNING: NFS: 221: Got error 13 from mount call
2019-08-20T05:54:50.440Z cpu10:2098455)WARNING: NFS: 221: Got error 13 from mount call
2019-08-20T05:55:20.447Z cpu79:2098455)WARNING: NFS: 221: Got error 13 from mount call
Cause
これは、ESXi esx.confファイルに残されたNFS共有のエントリーが停滞していることが原因で発生します。
Resolution
アクション プラン:
- NFSストレージがVMware KB https://kb.vmware.com/s/article/1005057 に従って正しく削除されていることを確認します
- 次のように、esx.confファイルに共有のトレースがあるかどうかを確認します。
/nas/NFS/readOnly = "false"
/nas/NFS/host = "fs-Cork-av.lab.org"
/nas/NFS/share = "/ifs/FS-CORK-AV/VM"
/nas/NFS/enabled = "true"
- 上記のようなエントリーが表示された場合は、次のアクションプランに進んでください。
- esx.confファイルのバックアップを作成します。
cp esx.conf esx.conf.old - esx.confファイル内の/nas/NFSストレージに関連する行をすべて削除し、ファイルを保存します。
- ファイルの行を編集した後、次のコマンドを実行して変更をコミットします。
auto-backup.sh - ノードをメンテナンス モードにし、同様に再起動します。
- esx.confファイルのバックアップを作成します。
Affected Products
VxRail, VxRail Appliance Series, VxRail G Series Nodes, VxRail D Series Nodes, VxRail D560, VxRail D560F, VxRail E Series Nodes, VxRail E460, VxRail E560, VxRail E560F, VxRail E560N, VxRail E660, VxRail E660F, VxRail E660N, VxRail E665, VxRail E665F
, VxRail E665N, VxRail G560, VxRail G560F, VxRail P Series Nodes, VxRail P470, VxRail P570, VxRail P570F, VxRail P580N, VxRail P670F, VxRail P670N, VxRail P675F, VxRail P675N, VxRail S Series Nodes, VxRail S470, VxRail S570, VxRail S670, VxRail Software, VxRail V Series Nodes, VxRail V470, VxRail V570, VxRail V570F, VXRAIL V670F, VxRail VD-4510C, VxRail VD-4520C, VxRail VE-660, VxRail VE-6615, VxRail VP-760, VxRail VP-7625
...
Article Properties
Article Number: 000082205
Article Type: Solution
Last Modified: 02 Jun 2025
Version: 4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.