VxRail：ESXi 節點會隨機嘗試連線至孤立的 NFS 資料存放區

Summary: 由於組態檔案中留下資訊，節點正在嘗試連線至未掛接的網路檔案共用 （NFS）。

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

從 VxRAIL 叢集取消掛接 NFS 資料存放區後，在 ESXi 主機嘗試連線 NFS 孤立共用的vmkernel.log上有痕跡，導致許多不必要的記錄資訊：
 

cat vmkernel.log | grep -i nfs
2019-08-20T05:48:50.335Z cpu29:2098455)WARNING: NFS: 221: Got error 13 from mount call
2019-08-20T05:49:20.340Z cpu21:2098455)WARNING: NFS: 221: Got error 13 from mount call
2019-08-20T05:49:50.348Z cpu12:2098455)WARNING: NFS: 221: Got error 13 from mount call
2019-08-20T05:50:20.373Z cpu17:2098455)WARNING: NFS: 221: Got error 13 from mount call
2019-08-20T05:50:50.379Z cpu28:2098455)WARNING: NFS: 221: Got error 13 from mount call
2019-08-20T05:51:20.386Z cpu8:2098455)WARNING: NFS: 221: Got error 13 from mount call
2019-08-20T05:51:50.393Z cpu31:2098455)WARNING: NFS: 221: Got error 13 from mount call
2019-08-20T05:52:20.400Z cpu1:2098455)WARNING: NFS: 221: Got error 13 from mount call
2019-08-20T05:52:50.408Z cpu24:2098455)WARNING: NFS: 221: Got error 13 from mount call
2019-08-20T05:53:20.421Z cpu29:2098455)WARNING: NFS: 221: Got error 13 from mount call
2019-08-20T05:53:50.427Z cpu31:2098455)WARNING: NFS: 221: Got error 13 from mount call
2019-08-20T05:54:20.432Z cpu11:2098455)WARNING: NFS: 221: Got error 13 from mount call
2019-08-20T05:54:50.440Z cpu10:2098455)WARNING: NFS: 221: Got error 13 from mount call
2019-08-20T05:55:20.447Z cpu79:2098455)WARNING: NFS: 221: Got error 13 from mount call

 

Cause

這是由於 ESXi esx.conf 檔案中剩餘的 NFS 共用項目停滯所造成。

Resolution

行動計畫：

  1. 確保已根據 VMware KB https://kb.vmware.com/s/article/1005057 正確移除 NFS 儲存裝置此超連結會帶您前往 Dell Technologies 以外的網站。
  2. 檢查 esx.conf 檔案中是否有任何共用痕跡，如下所示：
/nas/NFS/readOnly = "false"
/nas/NFS/host = "fs-Cork-av.lab.org"
/nas/NFS/share = "/ifs/FS-CORK-AV/VM"
/nas/NFS/enabled = "true"
  1. 如果您看到如上所示的項目，請繼續執行下列行動計畫。
    1. 備份 esx.conf 檔案： cp esx.conf esx.conf.old
    2. 移除 esx.conf 檔案中與 /nas/NFS 儲存裝置相關的任何行，然後儲存檔案。
    3. 編輯檔中的行後，執行以下命令以提交更改： auto-backup.sh
    4. 將節點置於維護模式，然後重新啟動。

Affected Products

VxRail, VxRail Appliance Series, VxRail G Series Nodes, VxRail D Series Nodes, VxRail D560, VxRail D560F, VxRail E Series Nodes, VxRail E460, VxRail E560, VxRail E560F, VxRail E560N, VxRail E660, VxRail E660F, VxRail E660N, VxRail E665, VxRail E665F , VxRail E665N, VxRail G560, VxRail G560F, VxRail P Series Nodes, VxRail P470, VxRail P570, VxRail P570F, VxRail P580N, VxRail P670F, VxRail P670N, VxRail P675F, VxRail P675N, VxRail S Series Nodes, VxRail S470, VxRail S570, VxRail S670, VxRail Software, VxRail V Series Nodes, VxRail V470, VxRail V570, VxRail V570F, VXRAIL V670F, VxRail VD-4510C, VxRail VD-4520C, VxRail VE-660, VxRail VE-6615, VxRail VP-760, VxRail VP-7625 ...
Article Properties
Article Number: 000082205
Article Type: Solution
Last Modified: 02 Jun 2025
Version:  4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.