PowerFlex: MSSQL 2019 Backup Fails And Reports Data Corruption Or Inconsistency

Summary: When using Windows 2019 SDC and running Microsoft SQL 2019 backup, the backup fails and reports there is data corruption or inconsistency (DI).

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

  • Windows 2019 with SDC installed (Note: RDM/VMDK disk devices are not impacted).
  • PowerFlex In-flight checksum feature is enabled.
  • Microsoft SQL 2019 backup fails with error: 
    The log scan number (0:-1218248704:37) passed to log scan in database 'TEST_VOL' is not valid. This error may indicate data corruption or that the log file (.ldf) does not match the data file (.mdf). If this error occurred during replication, re-create the publication. Otherwise, restore from backup if the problem results in a failure during startup."
  • PowerFlex traces (MDM, SDS, and SDC) there is no indication of any issue.

 

Note: The issue was found during the backup failure of Microsoft SQL 2019 but might impact other Windows applications.

 

Impact

Microsoft SQL 2019 backup failure
There is no real impact on data or any real data corruption or DI.

 

Cause

A software code issue in the SDC component, specifically with the in-flight checksum feature

When the in-flight checksum is enabled, the Windows SDC changes the FPU state during checksum calculations and does not restore it, which causes other users of FPU instructions, in this case, the MSSQL application, to receive unexpected results.

 

Resolution

As a workaround in-flight checksum should be disabled.

If the workaround is not feasible, upgrade to the fixed version, mentioned in the Fixed In Version section below. The fix includes a checksum calculation flow that will save the FPU state before calculating the checksum and restore it after the calculation is done.

 

Impacted Version

PowerFlex 3.x
PowerFlex 4.x

 

Fixed In Version

PowerFlex 3.6.5
PowerFlex 4.5.3

 

Affected Products

PowerFlex rack, PowerFlex Appliance, PowerFlex custom node, PowerFlex Software
Article Properties
Article Number: 000224854
Article Type: Solution
Last Modified: 21 Aug 2025
Version:  5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.