Cisco MDS：设置引导变量失败，并显示“实际映像类型与引导变量 （0x4045001E） 不匹配”

Summary: 客户执行从 NX-OS 6.2.23 到 9.4.2a 的中断升级。

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

用于设置引导变量的语法如下：
switch(config)#
no boot system
switch(config)#
boot bootflash:<kickstart new_kickstart_image_name>
switch(config)#
boot bootflash:<system new_system_image_name>
switch(config)#
end
switch#
copy running-config startup-config
switch#
reload

在 MDS 9148S 上运行以下命令的客户：
MDS9148S(config)# boot kickstart bootflash:m9148-s6ek9-kickstart-mz.9.4.2a.bin

Performing image verification and compatibility check, please wait....
Failed to configure bootvar kickstart for sup-1: mismatch between actual image type and boot variable (0x4045001E)

Cause

Cisco MDS9148s 平台使用的映像不正确：
从 MDS9148s：
MDS9148s# show version
  kickstart image file is: bootflash:///m9100-s5ek9-kickstart-mz.6.2.23.bin
  kickstart compile time:  3/31/2018 23:00:00 [02/20/2018 18:47:57]
  system image file is:    bootflash:///m9100-s5ek9-mz.6.2.23.bin
  system compile time:     3/31/2018 23:00:00 [02/20/2018 19:58:46]

请注意，show version from switch 是：
-m9100-s5ek9
但是尝试使用来自不同平台的映像设置引导变量将失败：
-m9148-s6ek9

Resolution

确保每个平台
都使用正确的系统/Kickstart 映像 可从中下载每种交换机类型的平台映像：https://www.dell.com/support/home/en-ie/product-support/product/connectrix/drivers

Affected Products

Connectrix MDS-9148S
Article Properties
Article Number: 000249589
Article Type: Solution
Last Modified: 12 Mar 2025
Version:  2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.