VxRail：如何通过 iDRAC 执行节点的远程辅助电量释放
Summary: 如何通过 iDRAC 执行节点的远程辅助电源释放。
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
要通过 iDRAC 执行节点的远程辅助排空，请执行以下步骤：
- 在 vCenter Web 客户端中将主机置于维护模式。
- 导航至“Configuration > BIOS settingsMiscellaneous > Settings” （下面的屏幕截图）
- 在 “Power Cycle Request” 下，从下拉列表中选择 Full Power Cycle ，然后单击 Apply 按钮。
- 然后从页面底部选择适当的选项，以启动重新启动并执行远程辅助耗尽。（如果您选择了“下次重新启动时” 选项，则必须在节点执行作之前手动重新启动节点）
有关更多信息，请参阅文章 iDRAC9 Virtual Power Cycle：远程重启 Dell EMC PowerEdge 服务器的电源
Additional Information
重置开始后，与 iDRAC 的连接会在短时间内中断，并在完成后可以重新登录。
Affected Products
VxRail, VxRail G Series Nodes, VxRail D Series Nodes, VxRail D560, VxRail D560F, VxRail E Series Nodes, VxRail E460, VxRail E560, VxRail E560F, VxRail E560N, VxRail E660, VxRail E660F, VxRail E660N, VxRail E665, VxRail E665F, VxRail E665N
, VxRail G560, VxRail G560F, VxRail P Series Nodes, VxRail P470, VxRail P570, VxRail P570F, VxRail P580N, VxRail P670F, VxRail P670N, VxRail P675F, VxRail P675N, VxRail S Series Nodes, VxRail S470, VxRail S570, VxRail S670, VxRail V Series Nodes, VxRail V470, VxRail V570, VxRail V570F, VXRAIL V670F, VxRail VD-4510C, VxRail VD-4520C, VxRail VD Series Nodes, VxRail VE-660, VxRail VE-6615, VxRail VP-760, VxRail VP-7625
...
Article Properties
Article Number: 000020620
Article Type: How To
Last Modified: 26 Feb 2025
Version: 4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.