Connectrix MDS 9000シリーズ: Error: 「コマンドは現在のゾーニング モードでは許可されていません」
Summary: 「Error: コマンド「zone commit vsan X」を実行すると、「Command is disallowed in current zoning mode」というエラーが表示される。
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
新しいゾーンはVSAN X.
で構成されます。実行しようとしている間
で構成されます。実行しようとしている間
zone commit vsan Xでは、次のエラーがトリガーされました。
Error: Command is disallowed in current zoning mode
Cause
VSAN Xゾーニング モードは基本モードであり、拡張モードではありませんでした。
Resolution
実行する必要はありません
zone commit vsan X コマンドを基本ゾーニング モードで実行します。Affected Products
Connectrix MDS-9148SProducts
Connectrix MDS-9148S, Connectrix MDS-Series Firmware, Connectrix MDS-Series HardwareArticle Properties
Article Number: 000060418
Article Type: Solution
Last Modified: 08 Oct 2025
Version: 3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.