Connectrix MDS 9000 Series: 오류: "현재 조닝 모드에서 명령이 허용되지 않음"
Summary: "Error: "zone commit vsan X" 명령을 실행할 때 "명령은 현재 조닝 모드에서 허용되지 않습니다"라는 메시지가 수신됩니다.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
VSAN X에서 새 존이 구성됩니다.
실행을 시도하는 동안
실행을 시도하는 동안
zone commit vsan X, 다음 오류가 트리거되었습니다.
Error: Command is disallowed in current zoning mode
Cause
VSAN X 조닝 모드는 고급 모드가 아닌 기본 모드입니다.
Resolution
를 실행할 필요가 없습니다.
zone commit vsan X 명령을 기본 조닝 모드에서 사용할 수 있습니다.Affected Products
Connectrix MDS-9148SProducts
Connectrix MDS-9148S, Connectrix MDS-Series Firmware, Connectrix MDS-Series HardwareArticle Properties
Article Number: 000060418
Article Type: Solution
Last Modified: 08 Oct 2025
Version: 3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.