PowerEdge：iDRAC 无法正确显示 ESXi 主机名和作系统
Summary: 提供在运行 VMware ESXi 6.5 及更高版本的服务器的 iDRAC 中填充系统主机名和作系统的步骤。
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
iDRAC 用户可能会注意到，Dell EMC PowerEdge 服务器未在 iDRAC Web 和 CLI 界面显示 VMware ESXi 6.5 或 6.7 系统主机名和操作系统字段。这种行为不同于以前在装有 VMware ESXi 6.0 及更低版本的 Dell EMC PowerEdge 服务器中看到的情况。
Cause
iDRAC 不会轮询作系统的主机名。作系统通过 CIM 提供程序将主机名推送到 iDRAC 控制器。在ESXi 6.0中，默认启用CIM提供程序。这种情况在ESXi 6.5中发生了变化。默认情况下禁用CIM提供程序。
Resolution
要纠正这种情况，必须通过ESXCLI启用CIM提供程序并重新启动主机。
esxcli system wbem set –e true
/etc/init.d/sfcbd-watchdog start
重新启动完成后，刷新 iDRAC，您应该会看到加载的主机名已更新。
在较新的 ESXi 6.5 和 6.7 内部版本中，启用 wbem 仍不会在 iDRAC 中显示正确的 ESXi 主机名。这是由于 VMware 有意更改所致，其中删除了此功能（使用内置 CIM 提供程序将主机名写入 BMC）。未来的意图是让 hostd 服务执行此功能。
如果启用 wbem （上面列出的说明）不能解决该问题，建议在 ESXi作系统中安装适用于 ESXi 的 Dell EMC iSM （iDRAC Service Module） 或 OpenManage Server Administrator vSphere 安装捆绑包 （VIB）。
Affected Products
iDRAC7, iDRAC8, iDRAC9, VMware ESXi 6.5.X, VMware ESXi 6.7.X, VMware ESXi 6.x, VMware ESXi 7.xProducts
iDRAC Service Module, PowerEdge FC640, PowerEdge M640, PowerEdge M640 (for PE VRTX), PowerEdge MX740C, PowerEdge MX840C, PowerEdge R240, PowerEdge R250, PowerEdge R340, PowerEdge R350, PowerEdge R440, PowerEdge R450, PowerEdge R540, PowerEdge R550
, PowerEdge R640, PowerEdge R6415, PowerEdge R650, PowerEdge R650xs, PowerEdge R6515, PowerEdge R6525, PowerEdge R740, PowerEdge R740XD, PowerEdge R740XD2, PowerEdge R7415, PowerEdge R7425, PowerEdge R750, PowerEdge R750XA, PowerEdge R750xs, PowerEdge R7515, PowerEdge R7525, PowerEdge R840, PowerEdge R940, PowerEdge R940xa, PowerEdge T140, PowerEdge T150, PowerEdge T340, PowerEdge T350, PowerEdge T440, PowerEdge T550, PowerEdge T640
...
Article Properties
Article Number: 000142904
Article Type: Solution
Last Modified: 04 Dec 2024
Version: 7
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.