iDRAC: iSM 5.1.0.0 metrische injectiefunctie mislukt met iDRAC9 7.00.00.00 of hoger
Summary: De functie voor metrische injectie van de iDRAC Service Module (iSM) mislukt met iSM 5.1.0.0 en iDRAC9 firmwareversie 7.00.00.00 of hoger.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
De functie Metrische injectie in iSM 5.1 werkt niet en is uitgeschakeld als iSM 5.1 is geïnstalleerd op een server met iDRAC-firmware 7.00.00.00 of hoger.
Dit is te zien op Windows- en Linux-besturingssystemen.
De functie Metrische injectie in iSM 5.1 wordt uitgeschakeld, zelfs als deze was ingeschakeld tijdens de iSM-installatie.
Telemetriefunctie inschakelen geeft onjuist ISM0058 bericht, patch, get-bewerking mislukt in iSM 5.1.0.0.
Dit is te zien op Windows- en Linux-besturingssystemen.
De functie Metrische injectie in iSM 5.1 wordt uitgeschakeld, zelfs als deze was ingeschakeld tijdens de iSM-installatie.
Telemetriefunctie inschakelen geeft onjuist ISM0058 bericht, patch, get-bewerking mislukt in iSM 5.1.0.0.
Cause
De firmwarecontrole van de iSM 5.1.0.0-code mislukt voor iDRAC 7.00.00.00 of hoger.
Resolution
Dit probleem is opgelost in de iSM 5.2.0.0-release.
Het probleem wordt opgelost door de nieuwste iSM te installeren bij gebruik van iDRAC9-firmware 7.xx.xx.xx.
Tijdelijke oplossing:
Downgrade naar iDRAC-firmware 6.10.xx.xx voor iSM 5.1.0.0.
Affected Products
iDRAC Service Module, iDRAC9 - 6.xx Series, iDRAC9 - 7.xx SeriesArticle Properties
Article Number: 000214763
Article Type: Solution
Last Modified: 10 Mar 2025
Version: 3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.