Cisco MDS：設定開機變數失敗，並顯示「實際映像類型與開機變數 （0x4045001E） 不相符」

Summary: 客戶執行從 NX-OS 6.2.23 至 9.4.2a 的中斷性升級。

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

用於設置引導變數的語法，如下所示：
switch(config)#
no boot system
switch(config)#
boot bootflash:<kickstart new_kickstart_image_name>
switch(config)#
boot bootflash:<system new_system_image_name>
switch(config)#
end
switch#
copy running-config startup-config
switch#
reload

客戶在 MDS 9148S 上執行下列命令：
MDS9148S(config)# boot kickstart bootflash:m9148-s6ek9-kickstart-mz.9.4.2a.bin

Performing image verification and compatibility check, please wait....
Failed to configure bootvar kickstart for sup-1: mismatch between actual image type and boot variable (0x4045001E)

Cause

Cisco MDS9148s 平台使用的映像不正確：
從 MDS9148s：
MDS9148s# show version
  kickstart image file is: bootflash:///m9100-s5ek9-kickstart-mz.6.2.23.bin
  kickstart compile time:  3/31/2018 23:00:00 [02/20/2018 18:47:57]
  system image file is:    bootflash:///m9100-s5ek9-mz.6.2.23.bin
  system compile time:     3/31/2018 23:00:00 [02/20/2018 19:58:46]

請注意，交換器的顯示版本為 ：
-m9100-s5ek9
但是嘗試使用來自不同平台的映像設定開機變數將會失敗：
-m9148-s6ek9

Resolution

確保每個平台
使用正確的系統/kickstart 映像 可從各交換器類型下載平台映像：
https://www.dell.com/support/home/en-ie/product-support/product/connectrix/drivers

Affected Products

Connectrix MDS-9148S
Article Properties
Article Number: 000249589
Article Type: Solution
Last Modified: 12 Mar 2025
Version:  2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.