PPDM Unity 백업 실패, ABNA0026 SNAPSHOT_AND_SLICE 작업 완료 불가, 과도한 스냅샷

Summary: Unity에 대한 PowerProtect Data Manager 백업이 실패하고 오류 ABNA0026: NAS 에이전트가 공유 경로에 대한 스냅샷을 생성할 수 없으므로 SNAPSHOT_AND_SLICE 작업을 완료할 수 없습니다. .

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Symptoms

Unity NAS 백업이 실패하고 다음 오류가 표시됩니다.

ABNA0026: Unable to complete the SNAPSHOT_AND_SLICE operation because the NAS Agent cannot create the snapshot for the share path unity_data01_smb.

Creation of the snapshot for the asset cannot be completed because an error occurred.

 To troubleshoot this issue: 
1) Check and address the vendor specific message for more details. 
2) Check the array to ensure that no errors occurred during snapshot creation. 
3) Check if the snapshot capability license is available and enabled. 
4) Manually clean up the snapshot if the snapshot capacity for the asset/file system has been exceeded. 
5) Make sure that backup user has all required privileges. 
6) Check if the filesystem has requisite available storage. 
7) Verify that the array can be reached over the proxy network. 
8) Check for the export path length. The characters that are allowed for path length should be within 255 characters.

그리고 자세한 오류 메시지의 경우 :

ABNA0026 오류 설명 ABNA0026 오류 세부 정보

NAS vProxy Engine Protection_ENGINE_FQDN is unable to perform SnapshotAndSlice operation for nasShare unity_data01_smb. 

Error Details:
 TaskId: 0f105547-a457-4939-83d1-0b76a92693dc, JobId 0f105547-a457-4939-83d1-0b76a92693dc 
 NAS agent error code 'ABNA0026'. Snapshot creation failed for file system 'unity_data01_smb'. Reason: Rest response code 409 for url : https://UNITY_IP/api/types/snap/instances, error Code : 1903001780, error message : Unable to create the snapshot because the maximum number of snapshots already exists for the file system. (Error Code:0x716d80b4)

Unity 파일 시스템에서 수동 스냅샷을 생성하려고 하면 다음 오류 메시지가 표시됩니다.

 Unity 파일 시스템의 수동 스냅샷에 다음 오류 메시지가 표시됨

Unable to create the snapshot because the maximum number of snapshots already exists for the file system. (Error Code: 0x716d80b4)

Cause

이 문제는 동일한 파일 시스템에 대한 스냅샷이 너무 많기 때문에 발생합니다.

Unity Unisphere의 SystemSoftware and LicensesSystem >Limits에 시스템 스냅샷 제한이 있습니다.

Unity Unisphere에 시스템 스냅샷 제한 사항이 표시됨

스냅샷 제한을 보여줍니다.

Resolution

이 문제를 해결하려면 파일 시스템에서 스냅샷 수를 줄이십시오.

이렇게 할 수 없는 경우 Dell Unity 지원 에 대한 서비스 요청을 열어 스냅샷이 많은 이유를 논의하고 이해하는 것이 좋습니다.

Affected Products

PowerProtect Data Manager
Article Properties
Article Number: 000371277
Article Type: Solution
Last Modified: 06 Dec 2025
Version:  2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.