VNX OE：如何在容錯移轉期間解決 PCI 元件不相符的錯誤

Summary: 本文說明如何解決容錯移轉期間的 PCI 元件不相符錯誤。

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions

slot_2上的其中一個 I/O 模組發生故障，無法在資料移動者重新開機期間載入。為了在更換 I/O 模組之前還原最終使用者的存取權限，請將server_2容錯移轉至 slot_3。

但是，由於 I/O 模組故障，出現 PCI 元件不相符的錯誤。

[nasadmin@cs0 /]$ server_standby server_2 -activate mover
server_2 :
Error 12032: server_2 : PCI components mismatch: blade hardware on standby server_3 does not match exactly the primary blade hardware.

若要解決此問題，請關閉電源slot_2並再次進行容錯移轉。

[nasadmin@cs0 /]$ /nas/sbin/t2reset pwroff -s 2
[nasadmin@cs0 /]$ server_standby server_2 -activate mover
server_2 :
 server_2 : going offline
 server_3 : going active
 replace in progress ...done
 failover activity complete
 commit  in progress (not interruptible)...done
 
server_2 : renamed as server_2.faulted.server_3
server_3 : renamed as server_2
...

Additional Information

此因應措施僅適用於此特定情況。

Affected Products

Entry Level & Midrange
Article Properties
Article Number: 000019342
Article Type: How To
Last Modified: 05 Dec 2025
Version:  5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.