如何在 Dell 陣列的 Microsoft MPIO 中設定所有必要的裝置 ID
Summary: 如何在 Dell 陣列的 Microsoft 多路徑 I/O （MPIO） 中設定所有必要的裝置 ID。
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
使用以下顯示的任何方法之前，必須先安裝或啟用 Microsoft Windows MPIO 功能。
僅需為您的系統新增適當的項目。
使用 MPIO 控制台小程式
- 開啟 MPIO 控制台小程式。
- 前往 MPIO 裝置標籤，當裝置存在時，便會顯示受 MPIO 管理的裝置的硬體 ID。
- 檢查 EMC、DGC、COMPELNT 或 Dell 廠商陣列類型是否存在，因為下方清單已新增對應的磁碟類型。
- 如果沒有，請單擊 “添加 ”，然後在設備下添加數位類型，該數位類型是 DGC，後跟 5 個空格，使其總共 8 個字元，包括空格。然後在硬體 ID 下，新增硬體。範例：RAID 10 或 RAID 5 或 VRAID 後跟空格，總共 16 個字元。然後 按一下 確定，並重新開機伺服器。
- 以下是在供應商 8 和產品 16 格式的 MPIO 中添加此類設備的範例：
Add DGC followed by 5 blank spaces, then RAID 0 followed by 10 blank spaces. Click OK. Add DGC followed by 5 blank spaces, then RAID 1 followed by 10 blank spaces. Click OK. Add DGC followed by 5 blank spaces, then RAID 3 followed by 10 blank spaces. Click OK. Add DGC followed by 5 blank spaces, then RAID 10 followed by 9 blank spaces. Click OK. Add DGC followed by 5 blank spaces, then RAID 5 followed by 10 blank spaces. Click OK. Add DGC followed by 5 blank spaces, then VRAID followed by 11 blank spaces. Click OK. Add DGC followed by 5 blank spaces, then DISK followed by 12 blank spaces. Click OK. Add DGC followed by 5 blank spaces, then VNX followed by 13 blank spaces. Click OK. Add EMC followed by 5 blank spaces, then Celerra followed by 9 blank spaces. Click OK. Add EMC followed by 5 blank spaces, then VPLEX followed by 11 blank spaces. Click OK. Add EMC followed by 5 blank spaces, then Invista followed by 9 blank spaces. Click OK. Add EMC followed by 5 blank spaces, then SYMMETRIX followed by 7 blank spaces. Click OK. Add XtremIO followed by 1 blank space, then XtremApp followed by 8 blank spaces. Click OK. Add COMPELNT followed by 0 blank spaces, then Compellent followed by 6 blank spaces. Click OK. Add DellEMC followed by 1 blank space, then by PowerStore followed by 6 blank spaces. Click OK.
- 新增相關裝置 ID 後，請將伺服器重新開機。
使用 MPCLAIM
開啟提升權限的命令提示字元 （即以系統管理員身分執行）。
注意：引號中的字串必須由兩個特定長度的字串組成。
供應商 ID 右填充了長度為 8 個字元的空格，緊接著產品 ID 右填充了長度為 16 個字元的空格，使總長度為 24 個字元。
mpclaim.exe -r i d "DGC RAID 0 " mpclaim.exe -r i d "DGC RAID 1 " mpclaim.exe -r i d "DGC RAID 3 " mpclaim.exe -r i d "DGC RAID 10 " mpclaim.exe -r i d "DGC RAID 5 " mpclaim.exe -r i d "DGC VRAID " mpclaim.exe -r i d "DGC DISK " mpclaim.exe -r i d "DGC VNX " mpclaim.exe -r i d "EMC Celerra " mpclaim.exe -r i d "EMC VPLEX " mpclaim.exe -r i d "EMC Invista " mpclaim.exe -r i d "EMC SYMMETRIX " mpclaim.exe -r i d "XtremIO XtremApp " mpclaim.exe -r i d "COMPELNTCompellent " mpclaim.exe -r i d "DellEMC PowerStore "
使用 PowerShell
上述替代方案是使用 PowerShell 命令新增裝置 ID。
開啟提升權限的 PowerShell 視窗 （即以系統管理員身分執行）。
使用 PowerShell 命令時，廠商 ID 和 ProductID 不需要填入空格。
New-MSDSMSupportedHW -VendorId "DGC" -ProductId "RAID 0" New-MSDSMSupportedHW -VendorId "DGC" -ProductId "RAID 1" New-MSDSMSupportedHW -VendorId "DGC" -ProductId "RAID 3" New-MSDSMSupportedHW -VendorId "DGC" -ProductId "RAID 10" New-MSDSMSupportedHW -VendorId "DGC" -ProductId "RAID 5" New-MSDSMSupportedHW -VendorId "DGC" -ProductId "VRAID" New-MSDSMSupportedHW -VendorId "DGC" -ProductId "DISK" New-MSDSMSupportedHW -VendorId "DGC" -ProductId "VNX" New-MSDSMSupportedHW -VendorId "EMC" -ProductId "Celerra" New-MSDSMSupportedHW -VendorId "EMC" -ProductId "VPLEX" New-MSDSMSupportedHW -VendorId "EMC" -ProductId "Invista" New-MSDSMSupportedHW -VendorId "EMC" -ProductId "SYMMETRIX" New-MSDSMSupportedHW -VendorId "XtremIO" -ProductId "XtremApp" New-MSDSMSupportedHW -VendorId "COMPELNT" -ProductId "Compellent" New-MSDSMSupportedHW -VendorId "DellEMC" -ProductId "PowerStore"
Affected Products
PowerPath for WindowsProducts
PowerPath for WindowsArticle Properties
Article Number: 000021038
Article Type: How To
Last Modified: 28 Oct 2025
Version: 9
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.