VxRail: Na stránce Physical chybí uzel kvůli zakázaným agentům CIM a Wbem.

Summary: Uzly VxRail mohou po odebrání rozhraní VMK1 ze stránky zmizet. To může být způsobeno zakázanými agenty CIM (Common Information Model) a neaktivní službou WBEM, která blokuje zprostředkovatele. ...

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Symptoms

V zobrazení fyzické stránky chybí uzel (VMK1 automaticky zmizí).

Cause

CIM Agenti jsou na uzlu zakázáni.
 

Resolution

  1. Zajistit wbem je povoleno: esxcli system wbem get
  2. Pokud wbem je zakázána, povolte ji příkazem: esxcli system wbem set enable true
  3. Zkontrolujte, zda všechny wbem Poskytovatelé jsou načteni: localcli system wbem provider list
    [root@node1:] localcli system wbem provider list
    Name              Enabled  Loaded
    ---------------------------------
    sfcb_base         true     true
    vmw_base          true     true
    vmw_dcism         true     true
    vmw_hdr           true     true
    vmw_iodmProvider  true     true
    vmw_kmodule       true     true
    vmw_omc           true     true
    vmw_pci           true     true
  4. Pokud existuje wbem poskytovatelé nejsou načteni, povolte CIM agentů (sfcbd-watchdog & wsman) pomocí níže uvedených příkazů.
    [root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] chkconfig sfcbd-watchdog
    sfcbd-watchdog          off
    [root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] chkconfig sfcbd-watchdog on
    [root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] /etc/init.d/sfcbd-watchdog status
    sfcbd is not running
    [root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] /etc/init.d/sfcbd-watchdog start
    sfcbd-init: Getting Exclusive access, please wait...
    sfcbd-init: Exclusive access granted.
    sfcbd-init: Request to start sfcbd-watchdog, pid 2111224
    sfcbd-config[2111234]: Configuration not changed, already enabled
    sfcbd-init: starting sfcbd
    sfcbd-init: Waiting for sfcb to start up.
    sfcbd-init: Program started normally.
    [root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] /etc/init.d/sfcbd-watchdog status
    sfcbd is running
    [root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] chkconfig wsman
    wsman                   off
    [root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] /etc/init.d/wsman status
    openwsmand is not running
    [root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] /etc/init.d/wsman start
    openwsmand: Getting Exclusive access, please wait...
    openwsmand: Exclusive access granted.
    openwsmand: Starting openwsmand
    [root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] /etc/init.d/wsman status
    openwsmand is running
    [root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] chkconfig wsman
    wsman                   off
    [root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] chkconfig wsman on
  5. Ověřte, zda je nyní v uzlu vytvořen vmk1.
  6. Zkontrolujte fyzickou stránku a zjistíte, že uzel je v pořádku.

Affected Products

VxRail, VxRail 460 and 470 Nodes, VxRail Appliance Series, VxRail G Series Nodes, VxRail D Series Nodes, VxRail E Series Nodes, VxRail P Series Nodes, VxRail S Series Nodes, VxRail Software, VxRail V Series Nodes, VxRail VD Series Nodes
Article Properties
Article Number: 000049893
Article Type: Solution
Last Modified: 23 Dec 2025
Version:  4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.