VxRail: Node mangler på siden Fysisk på grund af deaktiverede CIM-agenter og Wbem

Summary: VxRail-noder kan forsvinde fra siden, når VMK1-grænsefladen fjernes. Dette kan skyldes deaktiverede CIM-agenter (Common Information Model) og en inaktiv WBEM-tjeneste, der blokerer udbydere. ...

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

Node mangler i den fysiske sidevisning (VMK1 forsvinder automatisk).

Cause

CIM Agenter er deaktiveret på noden.
 

Resolution

  1. Sørg for, at wbem er aktiveret: esxcli system wbem get
  2. Hvis wbem er deaktiveret, aktiver det med kommandoen: esxcli system wbem set enable true
  3. Kontroller, om alle wbem Udbydere indlæses: localcli system wbem provider list 
    [root@node1:] localcli system wbem provider list
Name              Enabled  Loaded
---------------------------------
sfcb_base         true     true
vmw_base          true     true
vmw_dcism         true     true
vmw_hdr           true     true
vmw_iodmProvider  true     true
vmw_kmodule       true     true
vmw_omc           true     true
vmw_pci           true     true
  4. Hvis nogen wbem Udbydere indlæses ikke, aktiver CIM agenter (sfcbd-watchdog & wsman) ved hjælp af nedenstående kommandoer. 
    [root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] chkconfig sfcbd-watchdog
sfcbd-watchdog          off
[root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] chkconfig sfcbd-watchdog on
[root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] /etc/init.d/sfcbd-watchdog status
sfcbd is not running
[root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] /etc/init.d/sfcbd-watchdog start
sfcbd-init: Getting Exclusive access, please wait...
sfcbd-init: Exclusive access granted.
sfcbd-init: Request to start sfcbd-watchdog, pid 2111224
sfcbd-config[2111234]: Configuration not changed, already enabled
sfcbd-init: starting sfcbd
sfcbd-init: Waiting for sfcb to start up.
sfcbd-init: Program started normally.
[root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] /etc/init.d/sfcbd-watchdog status
sfcbd is running
[root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] chkconfig wsman
wsman                   off
[root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] /etc/init.d/wsman status
openwsmand is not running
[root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] /etc/init.d/wsman start
openwsmand: Getting Exclusive access, please wait...
openwsmand: Exclusive access granted.
openwsmand: Starting openwsmand
[root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] /etc/init.d/wsman status
openwsmand is running
[root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] chkconfig wsman
wsman                   off
[root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] chkconfig wsman on
  5. Bekræft, at vmk1 er oprettet på noden nu.
  6. Tjek den fysiske side, og noden er sund.

Affected Products

VxRail, VxRail 460 and 470 Nodes, VxRail Appliance Series, VxRail G Series Nodes, VxRail D Series Nodes, VxRail E Series Nodes, VxRail P Series Nodes, VxRail S Series Nodes, VxRail Software, VxRail V Series Nodes, VxRail VD Series Nodes
Article Properties
Article Number: 000049893
Article Type: Solution
Last Modified: 23 Dec 2025
Version:  4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.