VxRail: Devre Dışı Bırakılan CIM Aracıları ve Wbem Nedeniyle Fiziksel Sayfada Düğüm Eksik

Summary: VMK1 arayüzü kaldırıldığında VxRail düğümleri sayfadan kaybolabilir. Bunun nedeni, devre dışı bırakılmış Ortak Bilgi Modeli (CIM) aracıları ve sağlayıcıları engelleyen etkin olmayan bir WBEM hizmeti olabilir. ...

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

Fiziksel sayfa görünümünde düğüm eksik (VMK1 otomatik olarak kayboluyor).

Cause

CIM Aracılar düğümde devre dışı bırakılır.
 

Resolution

  1. Sağlamak wbem Etkindir: esxcli system wbem get
  2. Eğer wbem devre dışıysa, şu komutla etkinleştirin: esxcli system wbem set enable true
  3. Tümünün olup olmadığını kontrol edin wbem Sağlayıcılar yüklenir: localcli system wbem provider list 
    [root@node1:] localcli system wbem provider list
Name              Enabled  Loaded
---------------------------------
sfcb_base         true     true
vmw_base          true     true
vmw_dcism         true     true
vmw_hdr           true     true
vmw_iodmProvider  true     true
vmw_kmodule       true     true
vmw_omc           true     true
vmw_pci           true     true
  4. Varsa wbem Sağlayıcılar yüklü değil. CIM Ajanlar (sfcbd-watchdog ve wsman) aşağıdaki komutları kullanarak. 
    [root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] chkconfig sfcbd-watchdog
sfcbd-watchdog          off
[root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] chkconfig sfcbd-watchdog on
[root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] /etc/init.d/sfcbd-watchdog status
sfcbd is not running
[root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] /etc/init.d/sfcbd-watchdog start
sfcbd-init: Getting Exclusive access, please wait...
sfcbd-init: Exclusive access granted.
sfcbd-init: Request to start sfcbd-watchdog, pid 2111224
sfcbd-config[2111234]: Configuration not changed, already enabled
sfcbd-init: starting sfcbd
sfcbd-init: Waiting for sfcb to start up.
sfcbd-init: Program started normally.
[root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] /etc/init.d/sfcbd-watchdog status
sfcbd is running
[root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] chkconfig wsman
wsman                   off
[root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] /etc/init.d/wsman status
openwsmand is not running
[root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] /etc/init.d/wsman start
openwsmand: Getting Exclusive access, please wait...
openwsmand: Exclusive access granted.
openwsmand: Starting openwsmand
[root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] /etc/init.d/wsman status
openwsmand is running
[root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] chkconfig wsman
wsman                   off
[root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] chkconfig wsman on
  5. Şimdi düğümde vmk1'in oluşturulduğunu doğrulayın.
  6. Fiziksel sayfayı kontrol edin ve düğüm iyi durumda.

Affected Products

VxRail, VxRail 460 and 470 Nodes, VxRail Appliance Series, VxRail G Series Nodes, VxRail D Series Nodes, VxRail E Series Nodes, VxRail P Series Nodes, VxRail S Series Nodes, VxRail Software, VxRail V Series Nodes, VxRail VD Series Nodes
Article Properties
Article Number: 000049893
Article Type: Solution
Last Modified: 23 Dec 2025
Version:  4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.