VxRail：由於停用 CIM 代理程式和 wbem，實體頁面遺失節點

Summary: 移除 VMK1 介面後，VxRail 節點可能會從頁面中消失。這可能是由停用的共用資訊模型 （CIM） 代理程式和阻止提供程式的非活動 WBEM 服務引起的。

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

實體頁面檢視遺失節點 （VMK1 會自動消失）。

Cause

CIM 節點上的代理程式已停用。
 

Resolution

  1. 請確定 wbem 已啟用： esxcli system wbem get
  2. 如果 wbem 已停用，請使用以下命令啟用： esxcli system wbem set enable true
  3. 檢查是否全部 wbem 提供者已載入： localcli system wbem provider list 
    [root@node1:] localcli system wbem provider list
Name              Enabled  Loaded
---------------------------------
sfcb_base         true     true
vmw_base          true     true
vmw_dcism         true     true
vmw_hdr           true     true
vmw_iodmProvider  true     true
vmw_kmodule       true     true
vmw_omc           true     true
vmw_pci           true     true
  4. 若有 wbem 提供者未載入，啟用 CIM 代理 （sfcbd-watchdog & wsman） 來執行下列命令。 
    [root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] chkconfig sfcbd-watchdog
sfcbd-watchdog          off
[root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] chkconfig sfcbd-watchdog on
[root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] /etc/init.d/sfcbd-watchdog status
sfcbd is not running
[root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] /etc/init.d/sfcbd-watchdog start
sfcbd-init: Getting Exclusive access, please wait...
sfcbd-init: Exclusive access granted.
sfcbd-init: Request to start sfcbd-watchdog, pid 2111224
sfcbd-config[2111234]: Configuration not changed, already enabled
sfcbd-init: starting sfcbd
sfcbd-init: Waiting for sfcb to start up.
sfcbd-init: Program started normally.
[root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] /etc/init.d/sfcbd-watchdog status
sfcbd is running
[root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] chkconfig wsman
wsman                   off
[root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] /etc/init.d/wsman status
openwsmand is not running
[root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] /etc/init.d/wsman start
openwsmand: Getting Exclusive access, please wait...
openwsmand: Exclusive access granted.
openwsmand: Starting openwsmand
[root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] /etc/init.d/wsman status
openwsmand is running
[root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] chkconfig wsman
wsman                   off
[root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] chkconfig wsman on
  5. 確認節點上現在已建立 vmk1。
  6. 檢查實體頁面，確認節點狀況良好。

Affected Products

VxRail, VxRail 460 and 470 Nodes, VxRail Appliance Series, VxRail G Series Nodes, VxRail D Series Nodes, VxRail E Series Nodes, VxRail P Series Nodes, VxRail S Series Nodes, VxRail Software, VxRail V Series Nodes, VxRail VD Series Nodes
Article Properties
Article Number: 000049893
Article Type: Solution
Last Modified: 23 Dec 2025
Version:  4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.