Connectrix B-Series: Download af firmware mislykkedes på standby CP kunne ikke validere firmwaresignatur

Summary: Download af firmware mislykkedes på standby-CP – Kunne ikke validere firmwaresignatur. (0x3e)

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

Firmwareopgradering.

Følgende fejlmeddelelse vises, når du opgraderer FOS på en kabinetbaseret switch.  
Firmware download failed on standby CP - Failed to validate firmware signature. (0x3e)
RAS-logfiler: 
[SULB-1011], 374, SLOT 5 | CHASSIS, INFO,Firmwaredownload command failed. Failed to validate firmware signature

Cause

ukendt

Resolution

  • Sørg for, at der er en Ethernet-forbindelse til både Active og Standby CP-administrationsporte.
  • Sørg for, at IP-adresserne for både CP er og kabinettet alle er i det samme undernet.
  • Sørg også for, at du kan pinge den aktive IP-adresse, standby-IP-adressen og kabinettets IP-adresse.

Affected Products

Connectrix ED-48000B, Connectrix ED-DCX6-4B, Connectrix ED-DCX6-8B, Connectrix ED-DCX8510-4B, Connectrix ED-DCX8510-8B
Article Properties
Article Number: 000052597
Article Type: Solution
Last Modified: 31 Jul 2025
Version:  3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.