PowerFlex: Todos os SDCs desconectados da vmnic do SDS foram redefinidos para half-duplex e negociados automaticamente. 

Summary: Nesse caso, o VxRack-Flex estava tendo seu RCM atualizado.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

Nesse caso, foi um upgrade para a RCM do VxRack Flex.

Durante o upgrade da RCM de um VxRack Flex, um servidor perdeu a comunicação entre seu SDS e todos os SDCs.

Cause

Por algum motivo, o duplex e a velocidade no vmnic0 foram redefinidos para half-duplex e negociados automaticamente. 

Quando o sistema foi ligado, o Scaleio tentou conduzir a E/S por essa NIC, e ele continuou falhando porque o Scaleio estava tentando usar full duplex e velocidade 10000.

Isso fez com que o switch Cisco desligasse a porta vmnic0 estava ligada, pois o switch achava que a porta estava oscilando devido a um erro de rede. 

Aqui estão alguns registros do vmkernel.log demonstrando o abalo causado por esse cenário: 

2019-05-01T15:46:03.721Z cpu26:86039)netschedHClk: NetSchedHClkWatchdogSysWorld:4552: vmnic0: link up event received, device running at 10000 Mbps so setting queue depth to 86460 bytes with expected 1310 bytes/us
2019-05-01T15:46:04.648Z cpu42:85995)netschedHClk: NetSchedHClkWatchdogSysWorld:4364: vmnic0: hclk scheduler instance clean up
2019-05-01T15:46:04.649Z cpu45:85995)netschedHClk: NetSchedHClkDoFlushQueue:3874: vmnic0: dropping 42 packets from queue netsched.pools.persist.default
2019-05-01T15:46:04.649Z cpu45:85995)netschedHClk: NetSchedHClkDoFlushQueue:3874: vmnic0: dropping 501 packets from queue netsched.pools.vm.67108869
2019-05-01T15:46:04.650Z cpu45:85995)netschedHClk: NetSchedHClkDoFlushQueue:3874: vmnic0: dropping 122 packets from queue netsched.pools.persist.mgmt
2019-05-01T15:46:04.653Z cpu45:85995)netschedHClk: NetSchedHClkWatchdogSysWorld:4475: vmnic0: watchdog world (worldID = 85995) exits
2019-05-01T15:46:07.015Z cpu42:66250)ixgben: ixgben_CheckTxHang:1762: vmnic0: false hang detected on TX queue 0
2019-05-01T15:46:12.017Z cpu42:66250)ixgben: ixgben_CheckTxHang:1762: vmnic0: false hang detected on TX queue 0
2019-05-01T15:46:12.649Z cpu38:65725)ixgben: indrv_UplinkReset:1520: indrv_UplinkReset : vmnic0 device reset started
2019-05-01T15:46:12.649Z cpu38:65725)ixgben: indrv_UplinkQuiesceIo:1483: Stopping I/O on vmnic0
2019-05-01T15:46:12.740Z cpu52:66252)ixgben: ixgben_CheckLink:2514: Link is down for device vmnic0 (0x4307f4af4540)
2019-05-01T15:46:12.740Z cpu52:66252)netschedHClk: NetSchedHClkNotify:2908: vmnic0: link down notification
2019-05-01T15:46:12.740Z cpu52:66252)netschedHClk: NetSchedHClkDoFlushQueue:3874: vmnic0: dropping 211 packets from queue netsched.pools.vm.67108869
2019-05-01T15:46:12.740Z cpu38:65725)ixgben: indrv_DeviceReset:2382: Device Resetting vmnic0
2019-05-01T15:46:12.740Z cpu38:65725)ixgben: indrv_Stop:1950: stopping vmnic0
2019-05-01T15:46:13.013Z cpu38:65725)ixgben: indrv_UplinkStartIo:1460: Starting I/O on vmnic0
2019-05-01T15:46:13.130Z cpu38:65725)ixgben: indrv_UplinkReset:1540: indrv_UplinkReset : vmnic0 device reset completed
2019-05-01T15:46:13.177Z cpu52:66252)ixgben: ixgben_CheckLink:2514: Link is up for device vmnic0 (0x4307f4af4540)
2019-05-01T15:46:13.177Z cpu52:66252)netschedHClk: NetSchedHClkNotify:2900: vmnic0: link up notification
2019-05-01T15:46:13.341Z cpu52:66252)ixgben: ixgben_CheckLink:2514: Link is down for device vmnic0 (0x4307f4af4540)
2019-05-01T15:46:13.341Z cpu52:66252)netschedHClk: NetSchedHClkNotify:2908: vmnic0: link down notification
2019-05-01T15:46:13.348Z cpu52:66252)ixgben: ixgben_CheckLink:2514: Link is up for device vmnic0 (0x4307f4af4540)
2019-05-01T15:46:13.348Z cpu52:66252)netschedHClk: NetSchedHClkNotify:2900: vmnic0: link up notification
2019-05-01T15:46:13.573Z cpu52:66252)ixgben: ixgben_CheckLink:2514: Link is down for device vmnic0 (0x4307f4af4540)
2019-05-01T15:46:13.573Z cpu52:66252)netschedHClk: NetSchedHClkNotify:2908: vmnic0: link down notification

Resolution

1) Defina as configurações corretas na porta vmnic Nesse caso, era full-duplex e velocidade 10000.

2) Recupere a porta no switch Cisco:

Putty para o switch Cisco que possui a porta que deve ser devolvida.

Exiba todas as portas no switch:

#show interfaces status

No nosso caso, esse foi o status que vimos que era ruim:

Eth1/2/3      316     eth  access down    linkFlapErrDisabled        auto(D) --

Agora vamos pular a porta:

# enable
# configure terminal
(config)# interface Ethernet 1/2/3
(config-subif)# shutdown
(config-subif)# no shutdown
(config-subif)# end

# show interfaces Ethernet 1/2/3 status

A porta mostrará que está ativada e o problema com o SCALEIO será corrigido assim que começar a conduzir E/S novamente.

Affected Products

PowerFlex appliance Intelligent Catalog Software

Products

PowerFlex rack, VxFlex Ready Nodes, PowerFlex Appliance, PowerFlex custom node, PowerFlex appliance R650, PowerFlex appliance R6525, PowerFlex appliance R660, PowerFlex appliance R6625, Powerflex appliance R750, PowerFlex appliance R760 , PowerFlex appliance R7625, PowerFlex custom node, PowerFlex custom node R650, PowerFlex custom node R6525, PowerFlex custom node R660, PowerFlex custom node R6625, PowerFlex custom node R750, PowerFlex custom node R760, PowerFlex custom node R7625, PowerFlex rack connectivity, PowerFlex rack HW, PowerFlex rack RCM Software, PowerFlex Software, VxFlex Product Family, VxFlex Ready Node, VxFlex Ready Node R640, VxFlex Ready Node R740xd, PowerFlex appliance R640, PowerFlex appliance R740XD, PowerFlex appliance R7525, PowerFlex appliance R840, VxFlex Ready Node R840 ...
Article Properties
Article Number: 000055511
Article Type: Solution
Last Modified: 20 Nov 2025
Version:  4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.