PowerFlex: Alle SDC-er som ble koblet fra SDS vmnic, ble tilbakestilt til halv dupleks og automatisk forhandlet. 

Summary: I dette tilfellet fikk VxRack-Flex sin RCM oppgradert.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

I dette tilfellet var det en oppgradering til VxRack Flex RCM.

Under oppgraderingen av en VxRack Flex RCM mistet en server kommunikasjonen mellom SDS og alle SDC-ene.

Cause

Av en eller annen grunn ble dupleksen og hastigheten på vmnic0 tilbakestilt til halv dupleks og automatisk forhandle. 

Da systemet ble tatt opp, forsøkte Scaleio å kjøre I / O over dette NIC, og det fortsatte å mislykkes fordi Scaleio prøvde å bruke full dupleks og 10000 hastighet.

Dette førte til at Cisco-svitsjen gikk ned i porten vmnic0 var på siden svitsjen trodde porten var flagrende på grunn av en nettverksfeil. 

Her er noen poster fra vmkernel.log som demonstrerer flapping forårsaket av dette scenariet: 

2019-05-01T15:46:03.721Z cpu26:86039)netschedHClk: NetSchedHClkWatchdogSysWorld:4552: vmnic0: link up event received, device running at 10000 Mbps so setting queue depth to 86460 bytes with expected 1310 bytes/us
2019-05-01T15:46:04.648Z cpu42:85995)netschedHClk: NetSchedHClkWatchdogSysWorld:4364: vmnic0: hclk scheduler instance clean up
2019-05-01T15:46:04.649Z cpu45:85995)netschedHClk: NetSchedHClkDoFlushQueue:3874: vmnic0: dropping 42 packets from queue netsched.pools.persist.default
2019-05-01T15:46:04.649Z cpu45:85995)netschedHClk: NetSchedHClkDoFlushQueue:3874: vmnic0: dropping 501 packets from queue netsched.pools.vm.67108869
2019-05-01T15:46:04.650Z cpu45:85995)netschedHClk: NetSchedHClkDoFlushQueue:3874: vmnic0: dropping 122 packets from queue netsched.pools.persist.mgmt
2019-05-01T15:46:04.653Z cpu45:85995)netschedHClk: NetSchedHClkWatchdogSysWorld:4475: vmnic0: watchdog world (worldID = 85995) exits
2019-05-01T15:46:07.015Z cpu42:66250)ixgben: ixgben_CheckTxHang:1762: vmnic0: false hang detected on TX queue 0
2019-05-01T15:46:12.017Z cpu42:66250)ixgben: ixgben_CheckTxHang:1762: vmnic0: false hang detected on TX queue 0
2019-05-01T15:46:12.649Z cpu38:65725)ixgben: indrv_UplinkReset:1520: indrv_UplinkReset : vmnic0 device reset started
2019-05-01T15:46:12.649Z cpu38:65725)ixgben: indrv_UplinkQuiesceIo:1483: Stopping I/O on vmnic0
2019-05-01T15:46:12.740Z cpu52:66252)ixgben: ixgben_CheckLink:2514: Link is down for device vmnic0 (0x4307f4af4540)
2019-05-01T15:46:12.740Z cpu52:66252)netschedHClk: NetSchedHClkNotify:2908: vmnic0: link down notification
2019-05-01T15:46:12.740Z cpu52:66252)netschedHClk: NetSchedHClkDoFlushQueue:3874: vmnic0: dropping 211 packets from queue netsched.pools.vm.67108869
2019-05-01T15:46:12.740Z cpu38:65725)ixgben: indrv_DeviceReset:2382: Device Resetting vmnic0
2019-05-01T15:46:12.740Z cpu38:65725)ixgben: indrv_Stop:1950: stopping vmnic0
2019-05-01T15:46:13.013Z cpu38:65725)ixgben: indrv_UplinkStartIo:1460: Starting I/O on vmnic0
2019-05-01T15:46:13.130Z cpu38:65725)ixgben: indrv_UplinkReset:1540: indrv_UplinkReset : vmnic0 device reset completed
2019-05-01T15:46:13.177Z cpu52:66252)ixgben: ixgben_CheckLink:2514: Link is up for device vmnic0 (0x4307f4af4540)
2019-05-01T15:46:13.177Z cpu52:66252)netschedHClk: NetSchedHClkNotify:2900: vmnic0: link up notification
2019-05-01T15:46:13.341Z cpu52:66252)ixgben: ixgben_CheckLink:2514: Link is down for device vmnic0 (0x4307f4af4540)
2019-05-01T15:46:13.341Z cpu52:66252)netschedHClk: NetSchedHClkNotify:2908: vmnic0: link down notification
2019-05-01T15:46:13.348Z cpu52:66252)ixgben: ixgben_CheckLink:2514: Link is up for device vmnic0 (0x4307f4af4540)
2019-05-01T15:46:13.348Z cpu52:66252)netschedHClk: NetSchedHClkNotify:2900: vmnic0: link up notification
2019-05-01T15:46:13.573Z cpu52:66252)ixgben: ixgben_CheckLink:2514: Link is down for device vmnic0 (0x4307f4af4540)
2019-05-01T15:46:13.573Z cpu52:66252)netschedHClk: NetSchedHClkNotify:2908: vmnic0: link down notification

Resolution

1) Angi de riktige innstillingene på vmnic-porten I dette tilfellet var det full dupleks og 10000 hastighet.

2) Sprett porten på Cisco-svitsjen:

Putty til Cisco-svitsjen som eier porten som skal returneres.

Vis alle portene på svitsjen:

#show interfaces status

I vårt tilfelle var dette statusen vi så som var dårlig:

Eth1/2/3      316     eth  access down    linkFlapErrDisabled        auto(D) --

La oss nå sprette porten:

# enable
# configure terminal
(config)# interface Ethernet 1/2/3
(config-subif)# shutdown
(config-subif)# no shutdown
(config-subif)# end

# show interfaces Ethernet 1/2/3 status

Porten skal vise at den er aktivert, og problemet med SCALEIO fikser seg selv når den begynner å kjøre I/O igjen.

Affected Products

PowerFlex appliance Intelligent Catalog Software

Products

PowerFlex rack, VxFlex Ready Nodes, PowerFlex Appliance, PowerFlex custom node, PowerFlex appliance R650, PowerFlex appliance R6525, PowerFlex appliance R660, PowerFlex appliance R6625, Powerflex appliance R750, PowerFlex appliance R760 , PowerFlex appliance R7625, PowerFlex custom node, PowerFlex custom node R650, PowerFlex custom node R6525, PowerFlex custom node R660, PowerFlex custom node R6625, PowerFlex custom node R750, PowerFlex custom node R760, PowerFlex custom node R7625, PowerFlex rack connectivity, PowerFlex rack HW, PowerFlex rack RCM Software, PowerFlex Software, VxFlex Product Family, VxFlex Ready Node, VxFlex Ready Node R640, VxFlex Ready Node R740xd, PowerFlex appliance R640, PowerFlex appliance R740XD, PowerFlex appliance R7525, PowerFlex appliance R840, VxFlex Ready Node R840 ...
Article Properties
Article Number: 000055511
Article Type: Solution
Last Modified: 20 Nov 2025
Version:  4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.