VNX: Storage Processor did not boot after re-imaging to 05.33.009.5.236
Summary: A Storage Processor fails to start after re-imaging to VNX Block version 05.33.009.5.236 because of a code deficiency in the Operating Environment for that release.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
Storage Processor did not boot after re-imaging to 05.33.009.5.236
Cause
Code deficiency in VNX OE for Block version 05.33.009.5.236
Resolution
Cold reset the SP from the peer to resolve, via NAVISECCLI or SPECLCLI, no not need to physically reset the SP.
Fix for this issue is found in VNX OE for Block version 05.33.009.5.238
Fix for this issue is found in VNX OE for Block version 05.33.009.5.238
Affected Products
Entry Level & MidrangeArticle Properties
Article Number: 000056941
Article Type: Solution
Last Modified: 09 Dec 2025
Version: 5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.