Data Domain:DD9800 - 電圧に障害が発生しています - アラート

Summary: Data Domain DD9800リビジョン2 - トラブルシューティング アラート: ストレージ プロセッサー(SP)に障害が発生しました - 電圧に障害があります。

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Symptoms

ビットマップ エントリーが重複しているため、DD9800リビジョン2では、本当の問題がCPU外部IERRである場合に、「電圧に障害が発生している」という理由でSPを起訴する場合があります
両方のイベント(CPU外部IERRと「電圧に障害あり」)が同時に発生した場合は、電圧アラートを無視して、CPUでCPU IERRが発生した理由にトラブルシューティングを集中させるのが安全です。DD9800プラットフォームでのCPU IERRエラーのトラブルシューティングの詳細については、サポート プロバイダーにお問い合わせください

影響を受けるシステム:
- DD9800 Rev 2
- DDOS 5.7.x/6.0.x/ <6.1.3.0

症状:

通知されたアラート
=========

Time: Tue Mar 27 07:19:53 2018 Alert Id: p0-57 Event Id: EVT-ENVIRONMENT-00032 Event Message: The storage processor has failed Object: Enclosure=1 Additional Information: Cause=Voltage is faulty "Voltage is faulty" event found in messages.engineering log =============================================== Mar 15 05:48:27 platmon: CRITICAL: The storage processor has failed. Enclosure=1 Cause="Voltage is faulty" Mar 15 05:48:28 platmon: INFO: Event posted: p0-275 (11000113:28521xxxx): EVT-ENVIRONMENT-00032: The storage processor has failed EVT-OBJ::Enclosure=1 EVT-INFO::Cause=Voltage is faulty Mar 15 05:48:28 platmon: INFO: _ems_post_pubsub_event: Publishing event for alert EVT-ENVIRONMENT-00032

CPU IERR event found in bios.txt log =============================== 1 | 03/15/2018 | 05:33:39 | SMI Critical Interrupt Events Enter_SMI | SMI Critical Interrupt | Asserted | Used AUX Log (LSB 0x0) Used AUX Log (MSB 0x0) 2 | 03/15/2018 | 05:33:41 | CPU Status Events CPU2_Status | CPU IERR | Asserted | CPU External IERR 3 | 03/15/2018 | 05:33:41 | Entering IERR Interrupt Events Enter_SMI | IERR Interrupt | Asserted | Used AUX Log (LSB 0x24) Used AUX Log (MSB 0x0) 4 | 03/15/2018 | 05:33:42 | BMC Chassis Ctrl Events BMC_Chassis_Ctrl | Reset through BMC | Asserted 5 | 03/15/2018 | 05:34:04 | Power Unit DC_State | State Asserted | Deasserted

Cause

この問題は、DDOSバージョン5.7、6.0、および6.1で発生します

根本原因はSP障害ビットマップが重複しているため、IERRイベントが発生すると、警告メッセージに誤って「電圧に障害が発生しています」と表示されます

#define  APL_FRU_FAULT_SP_CPUMISC       (1 << 17)
#define   APL_FRU_FAILEDMAP_VOLTFAULT_SP    (1 << 17)

 

Resolution

このビットマップの重なりは、DDOS 6.1.3.xで修正されています

Additional Information


Affected Products

Data Domain

Products

Data Domain, DD9800 Appliance
Article Properties
Article Number: 000057408
Article Type: Solution
Last Modified: 16 Jun 2025
Version:  4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.