Dell Networking Force10スイッチでNetwork Time Protocolを管理する方法
Summary: この記事では、Dell Networking Force10スイッチでのネットワーク タイム プロトコル(NTP)の実装方法について説明します。
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
NTPを有効にしています
NTPは、初期設定ではデフォルトで無効になっています。
NTPを有効にするには、Dell Networkingシステムが同期するNTPサーバーを指定します。複数のサーバーを指定するには、コマンドを複数回入力します。CPUリソースを犠牲にして、無制限のサーバー数を指定することができます。
| コマンド | 目的 |
|---|---|
Console#configure |
設定モードに入ります。 |
Console(config)# ntp server (ip address) |
リモート タイム サーバーのIPアドレスを設定し、NTPを有効にします。 |
Console(config)#do show ntp status |
NTP設定の構成の検証 |
システム クロックの表示例
NTPに関するシステム クロックの状態を表示するには、 show ntp status コマンドを EXEC 特権モードから実行します。
Console(conf)#do show ntp status Clock is synchronized, stratum 2, reference is 192.168.1.1 frequency is -369.623 ppm, stability is 53.319 ppm, precision is 4294967279 reference time is CD63BCC2.0CBBD000 (16:54:26.049 UTC Thu Mar 12 2009) clock offset is 997.529984 msec, root delay is 0.00098 sec root dispersion is 10.04271 sec, peer dispersion is 10032.715 msec peer mode is client
インターフェイスでNTPを無効化しています
NTPがグローバルに有効になると、すべてのアクティブなインターフェイスでNTPが有効になります。インターフェイスでNTPを無効にすると、Dell FTOSはそのインターフェイスに送信されたNTPパケットをすべてドロップします
インターフェイスでNTPを無効にするには、次のコマンドを使用します。
| コマンド | 目的 |
|---|---|
Console#configure |
設定モードに入ります。 |
Console(config)# interface te 0/1 |
特定のポート インターフェイスを入力します。 |
Console(conf-if-te-0/1)#ntp disable |
インターフェイスでNTPを無効にします |
Affected Products
Force10 S60-44TArticle Properties
Article Number: 000120253
Article Type: How To
Last Modified: 05 Jun 2025
Version: 7
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.