警报：盘柜温度传感器已交换

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions

此信息性警报报告盘柜温度传感器已交换。  如果盘柜 IO 模块或电源组件已卸下并更换或重新插入，则此消息通常会出现。 
要清除 Dell Storage Manager 中的交换警报，请执行以下操作：
 
  1.  单击“Storage Viewer”（存储查看器）（位于左下角）
  2. 选择 Storage Center
  3. 单击“Hardware”（硬件）选项卡
  4. 将盘柜和警报中列出的盘柜展开
  5. 选择温度传感器
  6. 右键单击已显示“Swap Detected Yes”（检测到交换：是）的传感器，然后选择“Request Swap Clear”（请求清除交换）
如果此警报已生成，并且您不知道阵列上的任何维护，我们建议执行上面的“请求清除交换”过程。  如果该警报再次出现，请与戴尔存储支持部门联系。

Affected Products

Compellent (SC, SCv & FS Series), Dell Storage SCv2000, Dell Storage SCv2020, Dell Storage SCv2080, Dell Storage SC9000
Article Properties
Article Number: 000122203
Article Type: How To
Last Modified: 21 Feb 2021
Version:  3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.