PowerScale：流經非複寫集區的 SyncIQ 流量

Summary: 在未設定旗標「強制介面 = 否」和「限制目標網路 = 否」時，複製流量會流經非複製集區，

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

如果未設置以下標誌，則複製流量在某些情況下會流經非複製池，從而導致擁塞和性能問題。 
Force Interface: No
Restrict Target Network: No 

Cause

默認情況下，路由表上的預設路由用於確定流量源自的介面。

當「強制介面」和「限制目標網路」這兩個旗標未設定時，會使用路由表，並在非複寫網路集區上顯示流量。

Resolution

行動計劃：
  1. 確定要修改的原則，並檢查選項設定是否正確。
# isi sync policies view --policy=test | egrep 'Name:|Subnet|Pool|Force|Target:|Restrict'
範例： 
Isilon02-3# isi sync policies view --policy=test | egrep 'Name:|Target:|Subnet|Pool|Force|Restrict'
                                 Name: test
                               Target: target1.local
                        Source Subnet: Subnet1
                          Source Pool: Replication
                      Force Interface: No
              Restrict Target Network: No
  1. 設置標誌以將流量限制為正確的源和目標網路，並驗證更改。
# isi sync policies modify test --force-interface=yes --restrict-target-network=yes
# isi sync policies view --policy=test | egrep 'Name:|Subnet|Pool|Force|Target:|Restrict'

範例：

Isilon02-3# isi sync policies modify test --force_interface=yes --restrict-target-network=yes
Isilon02-3# isi sync policies view --policy=test | egrep 'Name:|Subnet|Pool|Force|Target:|Restrict'
                                 Name: test
                               Target: target1.local
                        Source Subnet: Subnet1
                          Source Pool: Replication
                      Force Interface: Yes
              Restrict Target Network: Yes

Affected Products

Isilon

Products

Isilon, Isilon SyncIQ
Article Properties
Article Number: 000161139
Article Type: Solution
Last Modified: 17 Dec 2025
Version:  5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.