PowerFlex: drvcfg not persistent following reboot of SDC
Summary:
The following command was performed on the SDC to add MDM. ./drv_cfg --add_mdm --ip
Following reboot of SDC, the ./drv_cfg --query_mdm reports 0 MDMs
retrieved.
...
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
Following reboot of SDC, the ./drv_cfg --query_mdm reports 0 MDMs retrieved.
The customer has to manually re-add using the below procedure.
cd /opt/emc/scaleio/sdc/bin/ ./drv_cfg --add_mdm --ip <MDM_IP_ADDRESS_LIST> ./drv_cfg --query_mdm (Retrieved 1 MDM(s))
The --add_mdm is not persistent following a reboot.
Cause
The below flag was not added to the --add_mdm command.
--file <CONFIG_FILE_NAME> Name of the configuration file to which the MDM information should be written.
Resolution
To make the change persistent, use the --file parameter.
/opt/emc/scaleio/sdc/bin/drv_cfg --add_mdm --ip <MDM_IP_ADDRESS_LIST --file /etc/emc/scaleio/drv_cfg.txt
The change was persistent upon adding the parameter following a reboot.
Affected Products
PowerFlex SoftwareProducts
PowerFlex rack, VxFlex Ready Nodes, PowerFlex custom node, PowerFlex appliance R650, PowerFlex appliance R6525, PowerFlex appliance R660, PowerFlex appliance R6625, Powerflex appliance R750, PowerFlex appliance R760, PowerFlex appliance R7625
, PowerFlex custom node, PowerFlex custom node R650, PowerFlex custom node R6525, PowerFlex custom node R660, PowerFlex custom node R6625, PowerFlex custom node R750, PowerFlex custom node R760, PowerFlex custom node R7625, PowerFlex rack connectivity, VxFlex Ready Node, VxFlex Ready Node R640, VxFlex Ready Node R740xd, PowerFlex appliance R640, PowerFlex appliance R740XD, PowerFlex appliance R7525, PowerFlex appliance R840, VxFlex Ready Node R840
...
Article Properties
Article Number: 000168740
Article Type: Solution
Last Modified: 25 Nov 2025
Version: 4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.