NetWorker:nsrwatch 命令将 IPv6 环回显示为 NetWorker 服务器的地址
Summary: 运行 nsrwatch 命令的顶部概览面板显示有关 NetWorker 服务器的信息,其中一个是 NetWorker 服务器 IP 地址。
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
nsrwatch 概述面板如下所示:
Overview Server: nws Address: ::1 Version: 19.6.0.0 Build 49 OS: Windows Server 2016 Standard Boot: Mon Feb 21 09:08:09 2022 Up Time: 50 minutes, 15 seconds nsrd Response: 0.001 sec jobd Response: 0.000 sec execd Response: 0.000 sec mmdbd Response: 0.000 sec Saves: 0 total (0 KB) Recovers: 0 total (0 KB)
Cause
启动 nsrwatch 时,它会从随“-s”标记提供的名称获取 IP 信息。
如果命令中未提供“-s”标记,则默认为“localhost”作为“name”从获取此信息。
此名称的信息取自操作系统。
如果“ping localhost”命令的输出显示“::1”,则这是 nsrwatch 中显示的内容。
如果命令中未提供“-s”标记,则默认为“localhost”作为“name”从获取此信息。
此名称的信息取自操作系统。
如果“ping localhost”命令的输出显示“::1”,则这是 nsrwatch 中显示的内容。
Resolution
对 NetWorker 服务器没有影响。
如果您希望 nsrwatch 显示 NetWorker 服务器的 IPv4,则必须调整操作系统以避免“ping localhost”命令返回“::1”地址。
如果您希望 nsrwatch 显示 NetWorker 服务器的 IPv4,则必须调整操作系统以避免“ping localhost”命令返回“::1”地址。
Affected Products
NetWorkerArticle Properties
Article Number: 000196530
Article Type: Solution
Last Modified: 22 Feb 2023
Version: 2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.