PowerStore: Preupgrade Health Check "Warning datapath Registry has nondefault setting on disk"
Summary: Preupgrade health check (PUHC) warning: The datapath Registry has nondefault settings on disk. These settings may not be appropriate postupgrade. Inspect on-disk Registry settings and unset any that are no longer relevant. ...
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
Preupgrade health check (PUHC) fails with:
The datapath Registry has non-default settings on disk. These settings may not be appropriate post-upgrade. Inspect on-disk Registry settings and unset any that are no longer relevant. (registry_overrides_present).As seen from the PowerStore Manager user interface (UI):
Cause
This issue occurs when internal parameters have been changed in a previous support case.
Resolution
Contact Dell Support for assistance. Reference article number 000202694 for expedited service.
Support reviews the asset history and assesses whether the nondefault parameters remain applicable after the NDU. Support advises on the most appropriate next steps Pre and Post-NDU based on this evaluation.
Affected Products
PowerStore 1000X, PowerStore 1000T, PowerStore 1200T, PowerStore 3000X, PowerStore 3000T, PowerStore 3200T, PowerStore 5000X, PowerStore 5000T, PowerStore 500T, PowerStore 5200T, PowerStore 7000X, PowerStore 7000T, PowerStore 9000X, PowerStore 9000T
, PowerStore 9200T
...
Article Properties
Article Number: 000202694
Article Type: Solution
Last Modified: 15 Oct 2025
Version: 7
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.