PowerStore：升级前运行状况检查“警告数据路径注册表在磁盘上具有非默认设置”
Summary: 升级前运行状况检查 （PUHC） 警告：数据路径注册表在磁盘上具有非默认设置。这些设置在升级后可能不适合。检查磁盘注册表设置并取消设置任何不再相关的设置。
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
升级前运行状况检查 （PUHC） 失败，并显示：
The datapath Registry has non-default settings on disk. These settings may not be appropriate post-upgrade. Inspect on-disk Registry settings and unset any that are no longer relevant. (registry_overrides_present).如 PowerStore Manager 用户界面 (UI) 所示：
Cause
当在以前的支持案例中更改了内部参数时，会出现此问题。
Resolution
请联系戴尔支持以获得帮助。请参阅文章编号 000202694，了解加急服务。
支持部门会审查资产历史记录，并评估非默认参数在 NDU 后是否仍然适用。支持部门根据此评估，就 NDU 前后的最合适的后续步骤提供建议。
Affected Products
PowerStore 1000X, PowerStore 1000T, PowerStore 1200T, PowerStore 3000X, PowerStore 3000T, PowerStore 3200T, PowerStore 5000X, PowerStore 5000T, PowerStore 500T, PowerStore 5200T, PowerStore 7000X, PowerStore 7000T, PowerStore 9000X, PowerStore 9000T
, PowerStore 9200T
...
Article Properties
Article Number: 000202694
Article Type: Solution
Last Modified: 15 Oct 2025
Version: 7
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.