PowerStore：升級前執行狀況檢查「警告資料路徑登錄檔在磁碟上有非預設設定」
Summary: 升級前執行狀況檢查 （PUHC） 警告：數據路徑註冊表在磁碟上具有非預設設置。這些設定在升級後可能並不合適。檢查磁碟上的註冊表設置，並取消設置任何不再相關的設置。
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
升級前執行狀況檢查 （PUHC） 失敗，並傳回：
The datapath Registry has non-default settings on disk. These settings may not be appropriate post-upgrade. Inspect on-disk Registry settings and unset any that are no longer relevant. (registry_overrides_present).PowerStore Manager 使用者介面 (UI) 顯示為：
Cause
當內部參數在先前的支援案例中已變更時，就會發生此問題。
Resolution
請連絡 Dell 支援尋求協助。請參閱文章編號 000202694，以瞭解快速服務。
支援人員會檢閱資產歷程記錄，並評估非預設參數在 NDU 之後是否仍然適用。支援部門會根據此評估，就 NDU 前和之後最適當的後續步驟提供建議。
Affected Products
PowerStore 1000X, PowerStore 1000T, PowerStore 1200T, PowerStore 3000X, PowerStore 3000T, PowerStore 3200T, PowerStore 5000X, PowerStore 5000T, PowerStore 500T, PowerStore 5200T, PowerStore 7000X, PowerStore 7000T, PowerStore 9000X, PowerStore 9000T
, PowerStore 9200T
...
Article Properties
Article Number: 000202694
Article Type: Solution
Last Modified: 15 Oct 2025
Version: 7
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.