Dell Optimizerのバージョン4.0へのアップグレード中にDell Command Updateが予期せず終了する
Summary: この記事では、Dell Optimizerをバージョン4.0にアップグレードするときにDell Command Updateが予期せず終了する理由について説明します。
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
Dell Command Update (DCU)ユーザーは、DCUを使用してDell Optimizerをバージョン4.0にアップグレードしようとすると、アプリケーションが予期せず終了することがあります。
Cause
アップグレード プロセスの一環として、Dell Optimizerインストーラーは、DCUとDell Optimizerの両方で使用されているDell Tech Hubサービスをシャットダウンします。
サービスが停止すると、DCUユーザー インターフェイス(UI)が終了します。
Resolution
Dell Optimizerのアップグレードが完了してから2分後に、Dell Tech Hubサービスが再開されます。
DCUを再実行して、アップデートが完了したことを確認できます。
または、DCUを起動すると、Dell Tech Hubサービスが自動的に再起動します。
Affected Products
Dell Command | Update, Dell OptimizerArticle Properties
Article Number: 000210957
Article Type: Solution
Last Modified: 11 Dec 2025
Version: 2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.