Dell Command Update wordt onverwacht afgesloten tijdens het upgraden van Dell Optimizer naar versie 4.0
Summary: Dit artikel bevat informatie over waarom Dell Command Update onverwacht wordt beëindigd bij het upgraden van Dell Optimizer naar versie 4.0.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
Gebruikers van Dell Command Update (DCU) kunnen merken dat de applicatie onverwacht wordt beëindigd wanneer ze Dell Optimizer proberen te upgraden naar versie 4.0 met behulp van DCU.
Cause
Als onderdeel van het upgradeproces beëindigt het installatieprogramma van Dell Optimizer de Dell Tech Hub-service die wordt gebruikt door zowel DCU als Dell Optimizer.
De DCU-gebruikersinterface (UI) wordt beëindigd wanneer de service wordt gestopt.
Resolution
De Dell Tech Hub service wordt twee minuten nadat de Dell Optimizer upgrade is voltooid opnieuw gestart.
DCU kan opnieuw worden uitgevoerd om te controleren of de updates zijn voltooid.
Als u DCU start, wordt de Dell Tech Hub-service ook automatisch opnieuw gestart.
Affected Products
Dell Command | Update, Dell OptimizerArticle Properties
Article Number: 000210957
Article Type: Solution
Last Modified: 11 Dec 2025
Version: 2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.