PowerScale: Cómo comprobar el estado del clúster y los eventos no resueltos

Summary: Cómo comprobar el estado del clúster y los eventos no resueltos.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions

Para comprobar el estado del clúster:
  1. Abra una conexión SSH en cualquier nodo del clúster e inicie sesión con la cuenta "raíz".
  2. Ejecute el siguiente comando:
# isi status

Cluster Name: Test
Cluster Health:     [  OK ]
Storage Efficiency: 0.83 : 1
Cluster Storage:  HDD                 SSD Storage
Size:             344.4G (469.8G Raw) 0 (0 Raw)
VHS Size:         125.4G
Used:             18.5G (5%)          0 (n/a)
Avail:            325.9G (95%)        0 (n/a)

                   Health  Throughput (bps)  HDD Storage      SSD Storage
ID |IP Address     |DASR |  In   Out  Total| Used / Size     |Used / Size
---+---------------+-----+-----+-----+-----+-----------------+-----------------
  1|10.xxx.x.xx    | OK  |    0| 132k| 132k| 3.3G/57.4G(  6%)|(No Storage SSDs)
  2|10.xxx.x.xx    | OK  |    0| 714k| 714k| 3.3G/57.4G(  6%)|(No Storage SSDs)
  3|10.xxx.x.xx    | OK  |    0|    0|    0| 2.6G/57.4G(  5%)|(No Storage SSDs)

---+---------------+-----+-----+-----+-----+-----------------+-----------------
Cluster Totals:          |    0| 1.9M| 1.9M|18.5G/ 344G(  5%)|(No Storage SSDs)

     Health Fields: D = Down, A = Attention, S = Smartfailed, R = Read-Only

Critical Events:
Time            LNN  Event
--------------- ---- -------------------------------------------------------

En la salida anterior, observe que la sección Cluster Health: [OK] está en buen estado y no hay eventos críticos pendientes. 

Para comprobar si hay alertas pendientes en todo el clúster, ejecute el siguiente comando:

# isi event groups list --resolved=false
ID   Started     Ended  Causes Short         Lnn  Events  Severity
---------------------------------------------------------------------
3072 12/17 00:55 --     QUOTA_INTERNAL_ERROR 1    9       warning
4105 12/20 01:11 --     QUOTA_NOTIFY_FAILED  3    6       information
---------------------------------------------------------------------

Para borrar un evento específico:

# isi event groups modify --resolved=yes --ignore=yes --id=<Group ID from above command >

Eg : isi event groups modify --resolved=yes --ignore=yes --id=3072

Para borrar todas las alertas antiguas en todo el clúster:

For OneFS 7.x.x.x and Above

# isi events cancel all
# isi events quiet all
For OneFS 8.x.x.x and above

# isi event bulk --ignore=true
# isi event bulk --resolved=true

Affected Products

Isilon, PowerScale OneFS
Article Properties
Article Number: 000223412
Article Type: How To
Last Modified: 18 Dec 2025
Version:  2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.