14G: es posible que iDRAC no muestre información del disco virtual de forma intermitente después de reiniciar el sistema
Summary: Después de reiniciar el sistema, es posible que Integrated Dell Remote Access Controller (iDRAC) no muestre la información del disco virtual de forma intermitente.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
Un evento informativo "RAC0513: There are no virtual disks to be displayed." puede mostrarse.
Cause
La causa raíz es que el inventario del disco virtual no está completo durante el reinicio del sistema debido a un problema de sincronización.
Resolution
Realizar un restablecimiento de iDRAC resuelve este problema.
Affected Products
PowerEdge R240, PowerEdge R340, PowerEdge R440, PowerEdge R540, PowerEdge R640, PowerEdge R6415, PowerEdge R740, PowerEdge R740XD, PowerEdge R740XD2, PowerEdge R7415Products
XE Servers, PowerEdge R7425, PowerEdge R840, PowerEdge R940, PowerEdge R940xa, PowerEdge T140, PowerEdge T340, PowerEdge T40, PowerEdge T440, PowerEdge T640Article Properties
Article Number: 000303213
Article Type: Solution
Last Modified: 27 May 2025
Version: 2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.